Where to get a Shovelhead oil line routing diagram?

Shovelhead oil line routing. Reply Contact Rob, go to wiringall.com /tech/wiringall.com and you can print out a routing diagram. If you want a good diagram and pics of oil line routing, check out the shovelhead forum (wiringall.com?).

Where does the oil go in a Shovelhead oil filter?

Mine has a line to Maybe this diagram from T & O will help.May 09, · There was a direct line from the tank to the input of the oil pump. The return from the oil pump went to a fitting on the oil tank that routed the oil to the inside of the oil filter.

Where can I get an oil line routing diagram?

Reply Contact Rob, go to wiringall.com /tech/wiringall.com and you can print out a routing diagram. If you want a good diagram and pics of oil line routing, check out the shovelhead forum (wiringall.com?). There’s good diagrams and pictures.

Is there oil line routing on a Shovelhead?

This is an oil pump on a shovelhead. It has more. we made a nice diagram of the oil lines on my 73 shovelhead, cut all the old lines and removed them. Lost the diagramweb.nety know of a nice. Shovelhead – Oil line routing on 76 FLH w/stock tank. – Restoring a 76 FLH. Need oil line routing diagram for stock oil tank. My sifton oil pump.

Is the primary chain oiler on a Buddies 76 FLH?

I am eliminating the primary chain oiling system on a buddies 76 FLH. According to the book the oil return is a gearcase breather (3/8 hose fitting). There is also a separate crankcase breather.

How to eliminate primary chain oiler in V-twin?

So here’s the plan. Plug the return and vent holes in the primary cover, use the oil feed fitting on the primary as a vent. Block off the oil feed line on the pump. Run a straight hose from pump to oil tank vent to eliminate the Tee that is currently in place and do something with the oil return fitting at the case.

Where does primary oil return go on V-twin?

Do you pull this fitting out of the case and plug the hole where the primary oil return goes or just routed this line to the vent Tee to the oil tank vent instead of the primary vent hose. So here’s the plan. Plug the return and vent holes in the primary cover, use the oil feed fitting on the primary as a vent.

What do I need for oil line routing?

Shovelhead – Oil line routing on 76 FLH w/stock tank. – Restoring a 76 FLH. Need oil line routing diagram for stock oil tank. My sifton oil pump. Hey, I’ve busted my ass looking for info on this pump & have come up with nothing.

How do you check the float setting on a Shovelhead?

The easiest way to check the float setting is to turn the bowl upside down. The end of the float on the far side from the needle and seat should be 1/8″ above the lower edge of the bowl with the bowl upside down.

Navigation