Where is the spark plug on a Buick?
If there is no spark, check the ignition control module located under the coil packs on the passenger side front of the engine. Probe the electrical plug with 14 wires in the ignition control module.
How to troubleshot a GM Buick engine that will not start?
Replace any blown fuses and try starting the car. Plug the code scanner cable plug into the OBD (on board diagnostics) port under the dash on the left side of the steering column. Turn the ignition key to the run (on) position, but do not try to start the car. Press the “Read” key on the scanner.
Why does my Buick Allure 2005 not start?
I have a Buick Allure 2005 will not start. Installed new fuel pump checked fuel relay. The fuel pump is not turning on. Car cranks over no problem will run till all fuel is out of the fuel line then cranks but no fire. I can tell the fuel pump is not running.
Why does my Buick LeSabre engine not start?
04 Buick lesabre turns over but will not start..fuel pump is working..there is fire coming the coil packs..though it does sound like the timing is or has jumped.. Well, all an engine needs to start is fuel pressure, spark, injector pulse and compression.
Why does my 1998 Buick Park Avenue die?
I have 3.8L V6 1998 Buick Park Avenue (Non Ultra) and it has recently starting dying. At first it would die whenever I took my foot off the accelerator and just coasted with traffic. When I put my foot back on the accelerator it would just lose power and die. I would have to stop wherever I was at, put the car in park and restart it.
Replace any blown fuses and try starting the car. Plug the code scanner cable plug into the OBD (on board diagnostics) port under the dash on the left side of the steering column. Turn the ignition key to the run (on) position, but do not try to start the car. Press the “Read” key on the scanner.
If there is no spark, check the ignition control module located under the coil packs on the passenger side front of the engine. Probe the electrical plug with 14 wires in the ignition control module.
How to fix a 98 Buick Park Ave V6?
Can someone with knowledge of a 98 Buick Park Ave 3.8L V6 PLEASE HELP. I will suggest some things to try. 1. Disconnect the electrical connection from the EGR valve on top of the engine at the back. You might tap on the heavy metal part a couple of times lightly to seat the pintle inside that blocks flow of exhaust gas, if it is sticking open.