Where is the purge valve located on 2016 Kia Optima?
if you are looking at you engine standing in front of your car the purge valve is located under the hose of the air cleaner on YOUR right side (the cars left/drivers side). you have to take the air cleaner and the hose off to get to it.
Where is purge control solenoid valve in Kia Optima?
The Purge Control Solenoid Valve (PCSV) is installed in the passage connecting the canister to the intake manifold. It is a duty type solenoid valve and is operated by ECM/PCM signal.
How does evaporative emission work in a Kia Optima?
The Canister is filled with charcoal and absorbs evaporated fuel vapor from the fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when appropriate conditions are set. The Purge Control Solenoid Valve (PCSV) is installed in the passage connecting the canister to the intake manifold.
Where is the canister close valve ( CCV ) located?
The Canister Close Valve (CCV) is located between the canister and the fuel tank air filter. It closes off the air inlet to fuel system during monitoring Evaporative System leak. The Evaporative Emission Control Monitoring System monitors fuel vapor generation, evacuation, and a leakage check step.
What are the systems in a Kia Optima?
This system consists of a fill vent valve, fuel shut-off valve, fuel cut valve (for roll over), two way valve (pressure/vacuum relief), fuel liquid/vapor separator which is installed beside the filler pipe, charcoal canister which is mounted under the rear floor LH side member and protector, tubes and miscellaneous connections.
How to replace canister purge valve Kia Optima?
1st locate purge valve. 2nd loosen both hose clamps and move away from purge valve fittings. 3rd. remove small steel staple from electrical connector. 5th remove rubber cover from old purge valve and reinstall on new purge valve. 6th. reinstall electrical connector and steel staple. 7th. reinstall hoses and replace hose connectors.
The Canister is filled with charcoal and absorbs evaporated fuel vapor from the fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when appropriate conditions are set. The Purge Control Solenoid Valve (PCSV) is installed in the passage connecting the canister to the intake manifold.
This system consists of a fill vent valve, fuel shut-off valve, fuel cut valve (for roll over), two way valve (pressure/vacuum relief), fuel liquid/vapor separator which is installed beside the filler pipe, charcoal canister which is mounted under the rear floor LH side member and protector, tubes and miscellaneous connections.
Where is the purge control solenoid valve in a Kia Rio?
The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when appropriate conditions are set. The Purge Control Solenoid Valve (PCSV) is installed in the passage connecting the canister to the intake manifold. It is a duty type solenoid valve and is operated by ECM/PCM signal.