Where can I get a new blower motor for my Nissan?
Find a new blower motor at any auto parts store — when purchasing a replacement blower motor, ensure that it is specific to your Nissan´s model and year. Remove the glove box assembly in the car´s cabin. Open the glove compartment and locate the four screws that secure the compartment to the dashboard.
Do you have to remove dashboard to change blower motor?
Fairly straightforward and there is no requirement to remove the dashboard. <div abp=”908″>3, There is a thin connecting piece of plastic that runs along the bottom of the full moulded dashboard, this can be seen when the trim below the steering wheel is removed. Cut this around half an inch from each end.
How do you repair a Nissan blower in Colorado?
Reattach the glove box assembly to the dashboard and secure it with the four screws removed in Step 1. Based in Colorado, Cecil Fontaine has been writing and editing since 2009, specializing in Brazilian travel guides. He received his Bachelor of Arts in political economy from the University of California, Berkeley in 2008.
Where is the airbag harness on a Nissan blower?
Pinpoint the airbag harness connector in the space behind the glove box assembly. Use your hands to pull the connector´s wiring from its power source. Note the blower motor assembly behind the airbag harness — it is held in place with screws. Remove the blower motor assembly screws and pull the assembly out from the dashboard.
How do you replace a blower motor in a car?
Reattach the wiring to the back of the blower motor assembly and install the blower motor assembly — with the new blower motor — back into the dashboard. Secure it with the screws previously removed. Reconnect the airbag harness connector to its power source.
Is the blower motor on a Nissan Altima loud?
We set the thermostat at 84 (it hardly blows anything) and use the heated seats and are still cold in the Altima. It seems they went “cheap” on just about everything you can’t see or touch. The blower motor is, however, loud.
How do you repair a Nissan blower motor?
Use your hands to pull the connector´s wiring from its power source. Note the blower motor assembly behind the airbag harness — it is held in place with screws. Remove the blower motor assembly screws and pull the assembly out from the dashboard.
Where is the blower motor on a Nissan Juke?
There are two molded plastic ‘clips’ (one each side) that hold the box in after you remove the screws. A bit of inward pressure on the sides of the glovebox as you pull should do the trick. With the glovebox out of the way you can get a bit further under the dash and reach the blower motor assembly.
Can a blower motor be removed from a car?
There are two wiring clips that can be disconnected if you want to remove the assembly from the car. A view looking through the glove box opening. The blower motor is now accessible. There are three screws that hold the blower motor in place. Remove them, and the motor will drop free.
When do you need to replace the blower motor relay?
If the blower motor does not function, car fuses are blown, or relays are melting, you may have to replace the car blower motor relay. 1. Blower motor does not function 2. Blown fuses 3. Melted relay The blower motor relay is the electrical switch that is used to supply the power for the vehicle’s blower motor.
Can a Nissan blower fan be replaced without removing the dashboard?
The blower motor fan may need replacement. I will show you how you can replace your Nissan Blower Motor without removing the dashboard. Disclaimers: all opinions are my own, sponsors are acknowledged. Links in the description are typically affiliate links that let you help support the channel at no extra cost. Loading…
If the blower motor does not function, car fuses are blown, or relays are melting, you may have to replace the car blower motor relay. 1. Blower motor does not function 2. Blown fuses 3. Melted relay The blower motor relay is the electrical switch that is used to supply the power for the vehicle’s blower motor.
What happens if you have a bad blower motor?
The blower motor is the component responsible for pushing air through the vents of your vehicle’s heating and air conditioning systems. Without it, the AC system will not be able to circulate any heated or cooled air.
Where is the blower control switch on the dashboard?
The blower control switch on the dashboard controls the circuit flow of the blower motor to adjust the voltage from low, to medium, to medium-high, to high. When on high, the circuit bypasses the blower resistor.