Where are the fuses for the low beam lights?
Your low beam fuse locations in the engine compartment fuse box are fuse #26 (15 amp) and #31 (15 amp). They are for the left side and right side low beam lights but I forget if that is facing the engine left and right or sitting in the driver’s seat left and right.
What should I do if my low beam light is not working?
Fuse or fulty c/breaker & relay as said, check earths. Tried runing a jumper/ with built in fuse, to one side + of light to check globes. Then work your way back..Or test lamp to check current is there..They are cheap bought from local parts store..
Where are the low beam and high beam relays?
There is however also a single lowbeam relay, which gets its signal from the body control module. So have a look at this relay first. You could swap the low beam and high beam relay to be sure that the problem is the relay. Both relays are on the junction block, above the fuse box.
What to do if your headlight fuse is not working?
First, locate the headlight fuse and make sure it is intact. If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks!
Where are the fuses on the passenger side low beam?
That is for the passenger side low beam. Picture 1 is the fuse box under hood specific to your vehicle. Look at the picture, locate number 16 and then locate it in the truck. Once you locate it, then you can check it. Pictures 2, 3, and 4 are the legend for what each fuse does. You will see that each light and beam choice has its own fuse,
Why does my driver side low beam light not work?
So driver side low beam doesn’t work I replaced the bulb and still nothing, high beam fog light and parking lights work fine, also passenger side turn signal lights are on but do not blink when activated and I get a display saying right front turn indicator failure, I tried replacing those bulbs and still no change any ideas? Thanks in advance
There is however also a single lowbeam relay, which gets its signal from the body control module. So have a look at this relay first. You could swap the low beam and high beam relay to be sure that the problem is the relay. Both relays are on the junction block, above the fuse box.
Can a low beam light be put on?
High beam yes, spot lights yes, fog lights yes and parkers yes. What is wrong with low beam? I drove home (i live only 3 mins from work) with parkers and fog lights on. Couldnt see very far at all. Lucky i didnt get pulled over.