When to replace the EGR valve on a diesel engine?
The EGR valve on a diesel engine usually gets a lot more dirt in it, and it has to be replaced and cleaned more often. The carbon build up can also destroy the EGR valve and you have to replace it more often. A lot of people, reprogram the EGR valve to not function to reduce the amount of carbon build up in the engine.
Why does my check engine light come on when my EGR valve is stuck?
Whether the EGR valve is clogged, stuck open, or stuck closed, you’re going to get a check engine light. While the check engine light will usually point you straight to the EGR valve, it is possible that it might come on due to a symptom instead of a cause.
What’s the best way to clean an EGR valve?
Cleaning the Valve: After removing the valve, use an EGR valve cleaner, if possible. However, you can use carburetor cleaner or solvent as well. Apply the cleaner to the passages at the bottom of the valve, intake and exhaust passages. Use a dull scraper and wire brush to remove carbon deposits from the bottom of the valve, plunger and valve seat.
How to test an EGR valve with a hand mirror?
As you do this, watch the valve diaphragm movement. Use a small hand mirror for this, if necessary. If the stem or diaphragm doesn’t move, disconnect the thin vacuum hose from the top of the valve. Place your finger on the opening of the vacuum hose you just disconnected. Increase engine rpm again as you did in the previous step.
The EGR valve on a diesel engine usually gets a lot more dirt in it, and it has to be replaced and cleaned more often. The carbon build up can also destroy the EGR valve and you have to replace it more often. A lot of people, reprogram the EGR valve to not function to reduce the amount of carbon build up in the engine.
Whether the EGR valve is clogged, stuck open, or stuck closed, you’re going to get a check engine light. While the check engine light will usually point you straight to the EGR valve, it is possible that it might come on due to a symptom instead of a cause.
Cleaning the Valve: After removing the valve, use an EGR valve cleaner, if possible. However, you can use carburetor cleaner or solvent as well. Apply the cleaner to the passages at the bottom of the valve, intake and exhaust passages. Use a dull scraper and wire brush to remove carbon deposits from the bottom of the valve, plunger and valve seat.
What do you need to know about EGR codes?
A basic explanation of the valve works would probably help with the understanding of the diagnosis and repair of EGR codes. Exhaust gas recirculation is necessary for emissions purposes. Unfortunately, when it malfunctions it can actually push emission levels off the chart.