When to perform steering angle sensor initialization procedure?
Therefore, always perform the initialization procedure to ensure DSC operation if the power supply to the steering angle sensor has been cut off due to disconnection of the steering angle sensor connector or negative battery cable, or any other cause. Note
How to reset the steering angle sensor at home?
1 Turn the steering wheel first as far as it will go anticlockwise and then as far as it will go clockwise 2 Turn off the engine and remove the key from the ignition 3 Remove driver side wheel, stop and pack vehicle 4 Turn off ignition, remove key, wait 10 seconds 5 Start engine, confirm normal Active Steering operation
How to calibrate steering angle sensor for VW audiauto?
There are certain test conditions that must be met before doing this procedure: *Start the vehicle. *Turn the steering wheel one turn to the right and one turn to the left. *Drive in a short distance straight line on a level surface at a speed not higher than 20 km/h.
Is there a way to test the steering angle?
You’ll need to have the engine running. Now you can check that turning the steering wheel results in a changing angle value. You can work through the other sensors too – e.g. brake pedal switch & body accelerometers. (You can unbolt them and move them to watch the results of your action).
What do you mean by steering angle sensor?
The definition of steering angle sensor SAS, steering angle sensor is a significant element of the ESC system which control the steering wheel position angle and rate of turn. To keep it easy, the steering in a car or other vehicle is the mechanical parts of it which make it possible to steer.
How to reset steering angle sensor ( SAS )?
There are many options for OBD2 tools to reset SASs. Some tools can even configure the size of tires. But, most tools recommend that the calibration be performed on a level surface. Multidiag Access J2534 is able to reset steering angle sensor for multi brand vehicle makes.
Why is my steering wheel postion sensor not working?
It’s very common for many mechanic shops to forget to reset or realign the steering angle sensor after they’ve completed their service. This can cause the symptoms above to occur, such as lighting the Traction Control Light, Check Engine Light, or impacting the drivability of the vehicle.
Which is part of ESC measures steering angle?
The steering angle sensor ( SAS) is a critical part of the ESC system that measures the steering wheel position angle and rate of turn.