When does the Suzuki GSX-R 1000 ignition switch turn on?
When the ignition switch is turned to the “on” position, the display indicates the test pat1arn shown below for three seconds. The display is memorized when the ignition switch is turned off and memorized display appears when the ignition switch is turned on.
What is the owners manual on a Suzuki GSX-R?
Suzuki GSX-R 1000 Owners Manual: Instrument panel Suzuki GSX-R 1000 Owners Manual/ Controls, equipment and adjustments/ Instrument panel The fuel indicator light 8,12,13 Lcd’s and tachometer needle work as follows to confirm their function when the ignition switch is turned to the “on” position.
What does gear position indicator on Suzuki GSX are 1000 mean?
The gear position indicator indicates gear position. This indicator displays “0” when the transmission is in neutral. The speedometer indicates the road speed in kilometers per hour and miles per hour. The display has five functions, clock, odometer and two trip meters and reserve trip meter.
How to reset the trip meter on a Suzuki GSX R?
To reset a trip meter to zero, push the adj button 2 For two seconds while the display indicates the trip meter, 1 or 2, you want to reset. The reserve trip meter counts distance from fuel tank reserve point until the fuel tank is refilled.
Why does my Suzuki GSXR not have Fi?
Turned the key ON, turned the run bttn ON and started the engine. FI was blinking. Turned the run OFF,then back ON, hit the start an the FI was gone. This second time I could actually hear a quick mute in the exhaust, caused for the complete valve closure.
What does the red indicator light 13 on Suzuki GSX-R Mean?
If the fuel injection system fails, the red indicator light 13 comes on and the display indicates “fi” at the coolant temperature display in following two modes; The display 14 indicates “fi” and the coolant temperature alternately, and the red indicator light 13 comes on and remains lit.
How do you get Fi code flashing on Suzuki GSX-R?
With your key in the ignition and bike turned to “on” (but not running), take a paperclip and short the two connectors out (by touching the two contacts together). This is known as a “ghetto dealer mode switch”.
Why does my Suzuki GSXR have a Fi warning?
Originally when the full exhaust Yosh RS-3 was installed all was done was the black/brown wire from the ECU input will prevent that “Fi” warning message from appearing in your instrument panel. That was the only wire cut, that’s it.
What is the F1 code on a Suzuki GSXR?
It is is small white connector that does not plug into anything, and has a rubber cap on one end. Click to expand… This is weird, after riding my 2002 GSXR-1000 over 19,000 miles I get the F1 code C46.
Where is the dealer mode switch on a Suzuki GSXR?
Location of dealer mode switch and how to get the codes. The dealer mode connector is under the tail cowling on the left side of the bike, near the regulator/rectifier. It will have only two wires going to it.
What is the c00 code on a 2005 GSXR1000?
On 2005 GSXR1000 when I install the jumper I get the C00 code. How do I get rid of the F1 and light if nothing is wrong?Looked through everything listed and I did not see anything about it.
When the ignition switch is turned to the “on” position, the display indicates the test pat1arn shown below for three seconds. The display is memorized when the ignition switch is turned off and memorized display appears when the ignition switch is turned on.
The gear position indicator indicates gear position. This indicator displays “0” when the transmission is in neutral. The speedometer indicates the road speed in kilometers per hour and miles per hour. The display has five functions, clock, odometer and two trip meters and reserve trip meter.
If the fuel injection system fails, the red indicator light 13 comes on and the display indicates “fi” at the coolant temperature display in following two modes; The display 14 indicates “fi” and the coolant temperature alternately, and the red indicator light 13 comes on and remains lit.
To reset a trip meter to zero, push the adj button 2 For two seconds while the display indicates the trip meter, 1 or 2, you want to reset. The reserve trip meter counts distance from fuel tank reserve point until the fuel tank is refilled.