When did the Suzuki GS550 engine come out?
The Suzuki GS550 was launched in June 1977 as part of the new GS family of DOHC four stroke machines, both twins and ‘Fours’. Its Air-cooled engine was beautifully engineered and gave a solid 49hp @ 9000 rpm.
How do you lock the ignition on a Suzuki GS?
To get to inside of the lock, fthe irst you need to remove the headlight bucket to get to the ignition switch. Remove the two Allen-head bolts holding the housing with a 5mm Allen Wrench. Then lock remove the small screw that holds the actual electrical switch to the housing and you will end up lock with the whole shebang in your hand.
What to do if your Suzuki ignition cylinder stops turning?
This tutorial is for Suzuki GS850 GZ ignition cylinder, but it is the same in principal for many other makes and models of motorcycles. If your ignition key stops turning, which often happens when the steering is locked positionin , first shoot a stream of WD-40 down the hole to see if it starts turning again.
Is the Suzuki GS 550 the same as the katana?
Looking nothing like it’s bigger sibling, the 550 had much more in common with the previous years’ GS model – but as Katana was the word of the day, many models within the Suzuki lineup were so branded.
In 1980, Suzuki introduced an updated engine on the GS550 models. The new engine had four valves per cylinder and a modified combustion chamber. This engine was used on the GS550, and all of the GS models until 1987.
What kind of engine does a Suzuki GS750 have?
The GS750 engine was essentially patterned off the Kawasaki Z1 -900, and became the design basis for all air-cooled Suzuki four-stroke fours until the release of the air-oil cooled GSX-R. The GS750 engine was fitted into a dual cradle frame with telescopic forks, twin rear shocks and a front disc brake.
How tall is a 1977 Suzuki GS 550?
It had a single disc brake at the front wheel, a drum rear brake, wire wheels and a inline-four engine with two valves per cylinder. GS 550 1977 Overall Length: 2 175 mm (85.6 in) Overall Width: 850 mm (31.7 in) Overall Height: 1 155 mm (45.5 in) Wheelbase: 1 435 mm (56.5 in)
When was the first Suzuki GS bike made?
Suzuki changed that with the introduction of three new bikes in the GS family for 1977, the GS400, GS550 and GS750. The GS received instant critical and commercial success. The GS550 was a total sellout for Suzuki. The original Suzuki GS550 was in production for two years, 1977 and 1978.
In 1980, Suzuki introduced an updated engine on the GS550 models. The new engine had four valves per cylinder and a modified combustion chamber. This engine was used on the GS550, and all of the GS models until 1987.
Suzuki changed that with the introduction of three new bikes in the GS family for 1977, the GS400, GS550 and GS750. The GS received instant critical and commercial success. The GS550 was a total sellout for Suzuki. The original Suzuki GS550 was in production for two years, 1977 and 1978.
What kind of disc brake does a Suzuki gs550l have?
The 1982 GS550L had metal front disc reservoir instead of white plastic on earlier model years. The rear disc brake was changed to drum brake and , and the dual front discs were replaced with a single disc. Pin striping on the tank and sidecovers was very unique to this year. No longer a continuous loop.
What should I replace on my claymer GS550?
New valve cover gasket 34.) New clutch push rod oil O-ring 35.) Replace front brake lever 36.) Replace battery holder 37.) Replace battery leeds and grounds 38.) Rebuild starter 39.) Custom paint job on starter cover, rotor, airbox 40.) Replace 2 handgrips 41.) Cut 2 new backup keys 42.) Purchased Claymer and Hayes GS550 manuals 43.)