What wheels will fit a Toyota Hiace?
Toyota: Hiace, 6/139.7 Bolt Pattern – All models, 2004 Onwards
| Wheel | Sizes (Inches) | Features |
|---|---|---|
| Magnum II | 15×7, 16×7 | Black M-Face |
| Monster – Large Cap | 16×7, 16×7 | Black Machine Face |
| Ranger – Black | 16×7 | Black |
| Ranger – White | 16×7 | White |
Does width size matter for rims?
The width of the rim will influence the width of the tire. A tire mounted on a narrow rim would be “narrower” than if the same size tire was mounted on a wide rim. The industry rule of thumb is that for every 1/2″ change in rim width, the tire’s section width will correspondingly change by approximately 2/10″.
What size of rims do I need?
You’ll need three numbers. First, measure the diameter and width of your existing wheels. You can choose to go with that stock size or something larger. Just keep in mind that larger wheels will mean you need lower profile tires in order for the combination to clear your vehicle.
How do you measure if wheels will fit?
Put simply, to find if your wheels will fit your car, measure the distance from your wheel’s center point to where it is mounted. This is the offset. Add that to half your wheel’s width to find the back space and subtract it to find the front space. Compare this to your wheel well to see if it fits.
What is Ford stud pattern?
Find Your Stud Pattern
| Stud Pattern | Stud PCD | Common Stud Size |
|---|---|---|
| FORD | 5 x 114.3mm | 1/2″ |
| COMMODORE | 5 x 120mm | 7/16″ |
| HQ HOLDEN | 5 x 120.65mm | 7/16″ |
| HT HOLDEN | 5 x 108mm | 7/16″ |
Will a 285 tire fit a 10 inch rim?
A 285 is technically the “perfect” size for a 10 inch wide rim. You could go to 295, but you lose some of the structural support provided by the rim to the tire.
Can you fit a 275 tire on a 8.5 inch rim?
PhantomX Member Established Member. Yup you can do it no problem I had them on the stock rims and a set of AMR’s so go for it. No issues with rubbing or balancing or budging.
How do you know the biggest tire size?
To measure for bigger tires, follow these steps:
- Remove the current wheels and measure the tires’ exact width and height.
- Put the wheels back and measure the distance between the tire and every part around it.
- Make the same measurements after turning the front wheels to the full steering lock in all directions.
How do you measure what size tires will fit?
Aspect Ratio
- The two digit number after the slash mark is the aspect ratio which measures the tire’s cross-section to it’s width.
- If the tire size is 255/60 R16, the 60 means that the height is 60% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.