What should I do after replacing my power steering pump?
After replacing a power steering pump or pressure hose, it’s always a good plan to flush and bleed the power steering system of air. For most power steering-equipped vehicles, this is a simple process. Turning the steering wheel lock to lock several times will remove any unwanted air in there.
How to flush and bleed power steering systems?
Raising the wheels above the ground with a jack and jack stands can make turning the steering wheel easier. Step 4: Run the tubing into a dedicated catch container to bleed the system of both air and old fluid. Be careful not to run the system out of fluid!
How to replace the steering filter on a Mercedes SL Class?
Step by step instructions to replace your power steering filter. The steering responds though several bushings and struts. The center link is the first bushing set up past the steering box to examine if too much play is occurring. Learn how to replace the center link. Each front wheel has a drag link.
When do you replace the steering ball joint?
The upper control arm houses the steering ball joint. To replace the ball joint, the upper control arm has to be replaced. Learn how. When you have checked all your steering components and still have steering issues like slop and jittering, maybe its time to swap out the steering gearbox.
Step by step instructions to replace your power steering filter. The steering responds though several bushings and struts. The center link is the first bushing set up past the steering box to examine if too much play is occurring. Learn how to replace the center link. Each front wheel has a drag link.
The upper control arm houses the steering ball joint. To replace the ball joint, the upper control arm has to be replaced. Learn how. When you have checked all your steering components and still have steering issues like slop and jittering, maybe its time to swap out the steering gearbox.
When to replace rear shocks on a Mercedes?
Over time your rear shocks can begin to give way, your ride becomes less comfortable. Replacing the shocks is simple if you follow the following steps. If your front bumper’s looking well past its prime give your Mercedes a fresh face with a new bumper. Should you have some DIY work to do in your engine bay, remove your hood for easy access.
When to replace the idler arm bushings on a Mercedes?
Each front wheel has a drag link. If you notice that the front wheels feel a shudder or vibration or there is slop in the responsiveness the drag link bushings may need to be replaced. Learn how to replace the bushings. If your steering has more play then normal, the idler arm bushings may be worn out. Learn how to change them.