What kind of horsepower does a Pontiac Bonneville have?
Optionally available was the 455 four-barrel V8 rated at 250 horsepower (186 kW) for 1973-74 and 200 for 1975-76.
When did the Pontiac Bonneville go front wheel drive?
In 1987, the Parisienne was discontinued and the Bonneville was completely redesigned as a front-wheel drive car, rejoining its pre-1982 platform mates: the Buick LeSabre and Oldsmobile Delta 88 and it regained its status as the senior Pontiac.
When did the Pontiac Bonneville Brougham option come out?
Beginning in 1964, a Bonneville Brougham option package was available that included an even more luxurious interior trim level with front and rear seats featuring center armrests, upgraded door panels and a standard Cordova (vinyl) roof with “Brougham” nameplates.
What are the torque specs on a Pontiac?
Pontiac Engine Torque Specs Bolts or Parts Lube or Sealer Torque to: Rocker Studs (screw-in) Engine Oil 55 ft-lbs. Rocker Arm Nuts (Non-Adjustable Rockers) Assembly Lube 20 ft-lbs. Oil Pump Bolts Engine Oil 30 ft-lbs. Oil Pump Cover Bolts Engine Oil 15 ft-lbs.
What kind of engine did the Pontiac Bonneville have?
1958 Pontiac Bonneville Sport Coupe Tempest 395 Four-Barrel Hydra-Matic (aut. 4) Horsepower/Torque Curve 1958 Pontiac Bonneville Sport Coupe Tempest 395 Four-Barrel Hydra-Matic (aut. 4) Standard and Alternative Wheel and Tire Sizes 1958 Pontiac Bonneville Sport Coupe Tempest 395 Fuel Injection Hydra-Matic (aut.
How big is the main bore on a Pontiac?
Main Bore diameter: – 3″: 3.1880 to 3.1890 Our tolerance is 3.1880 to 3.1885. Main Bore diameter: – 3.25″: 3.4380 – 3.4390. Again, we use 3.4380 – 3.4385 Rod Bore diameter: 2.3745 – 2.3750″ use the small side 2.3745 to 2.3748. Pontiac center to center distance lifter bores – 1.818″ 6 cyl.
What are the bores on a Pontiac 301?
Pontiac 301 Deck height – 9.143″ Bore Spacing – 4.62″ Cam to Mains – 5.192″ center to center Main Bore diameter: – 3″: 3.1880 to 3.1890 Our tolerance is 3.1880 to 3.1885. Main Bore diameter: – 3.25″: 3.4380 – 3.4390. Again, we use 3.4380 – 3.4385 Rod Bore diameter: 2.3745 – 2.3750″ use…
What was the name of the Pontiac Bonneville in 1982?
The 1982-1986 models were officially known as the Pontiac Bonneville Model G (built on the GM “G” platform ), although later models were not badged as such. Styling was revised to bear a closer resemblance to the departed B-body Bonneville and coupes were dropped.
Where is the fuse box on a Pontiac Bonneville?
It is located under the left rear seat (remove the seat and open the fuse box cover). How to check the fuses? How to replace a blown fuse?
What kind of transmission did a Pontiac Bonneville have?
Bonneville models were standard equipped with Hydra-Matic (through 1964) or Turbo Hydra-Matic (1965-on) automatic transmissions. Options included power steering and power brakes as well as air conditioning.
When did the Pontiac Bonneville become a top line car?
In its third year, the 1959 Bonneville became a full top-line series with the addition of the four-door hardtop sedan and Safari station wagon body styles. The Bonneville played an important part that year in the introduction of two of Pontiac’s greatest marketing inspirations — the split grille and the Wide Track slogan.
What kind of carburetor does a Pontiac Bonneville use?
The 389 cubic inch plant was replaced with 400 cu in (6.6 L) one, and the 421 cubic inch plant was replaced with a 428 cu in (7.0 L) one. As per GM’s internal edict, the multi-carburation setups found on earlier cars were replaced with the new Quadra Jet “spread bore” carburetor.
When did the Pontiac Bonneville 40th anniversary come out?
In 1997, Pontiac made a 40th Anniversary Edition to mark the 40th year of production of the Bonneville. Pontiac made six models: the SE, the 40th Anniversary SE, the SSE, the 40th Anniversary SSE, the SSEi, and the 40th Anniversary SSEi. The 40th Anniversary SSEi is the rarest model with a total production of 637 units.