What kind of engine does Honda Foreman 500 have?
Effective liquid-cooled 475 cc four-stroke engine is longitudinally mounted, enabling straight driveshaft placement to both front and also back wheels for maximum drivetrain efficiency. Overhead-valve layout supplies compact engine dimensions for boosted ground clearance while keeping a broad, simple powerband.
What’s the valve size on a Honda Foreman?
This is to relieve the compression in the engine when you get it to top dead center. Once you have the engine at top dead center it is finally time to check those valves. Using the .006in or .15mm size insert the feeler between the valve spring and the rocker arm.
Where are the rivets on a Honda Foreman 500?
The next step is to pull off the gas tank shrouds. Pull out the plastic rivets with the blade screwdriver again, there should be 4 on the right side and 5 on the left. Leave the two rivets on the back of the gas tank shroud in place, it will be easier to remove and reinstall the fenders.
Do you need valve clearance on Honda CB500?
He said: “The all-new parallel twin engine designed specifically for the CB (R)500 series has a valve train system, which uses a rocker arm and shims design. This requires a valve clearance check at the first service, as per the owners’ manual. “Valve clearance checks and service intervals vary across our range.
Where are the valve inspection holes on a Honda Foreman 500?
ChevyNc, I don’t recall the location of the valve inspection holes on the 450 as I never looked at my old one. Also, I beleive the valve clearances are probably different. Mabye someone else can shed some light on this subject. yeah no holes on a 450, you need to remove the valve cover.
The next step is to pull off the gas tank shrouds. Pull out the plastic rivets with the blade screwdriver again, there should be 4 on the right side and 5 on the left. Leave the two rivets on the back of the gas tank shroud in place, it will be easier to remove and reinstall the fenders.
Do you have to remove seat to change valve on Honda Foreman?
Disclaimer: Hondaforeman.com is not responsible for any damage caused to you or your bike. In order to get to the valves you must remove the gas tank and all those plastic shrouds and covers.. The first step is to remove the seat and the stock intake snorkel.