What is a weight distribution shank?
Weight distribution replacement shank is made for heavy-duty towing. It features a 2″ x 2″ shank to fit any equivalent size receiver tube opening, and it offers the strength necessary for towing large RVs and travel trailers.
What are the parts of a weight distribution hitch?
What Are the Components of a Weight Distribution System?
- Class III, IV, or V trailer hitch receiver rated for use with weight distribution.
- Weight distribution shank (slides into trailer hitch)
- Weight distribution head assembly.
- Spring bars.
- Frame brackets.
Are weight distribution Shanks interchangeable?
The shank parts of most weight distribution hitches use standardized hole sizing and spacing so the shank from one brand of WD system will work with the head assembly from another brand. …
What size shank is my hitch?
Measure from the top of the ball to the flat part of the base where the ball will sit on the hitch head. Do not include the length of the threaded shank. Measure from the ground directly below the receiver to the inside top of the receiver tube (where the top of the shank will be).
What is the difference between ATM and GTM?
Aggregate Trailer Mass (ATM) is the total mass of the trailer when carrying the maximum load recommended by the manufacturer. Gross Trailer Mass (GTM) is the maximum mass recommeded by the manufacturer of your fully loaded caravan when it is hitched to your tow vehicle.
What does shank mean on hitch?
A shank is the hole in the ball mount that the trailer ball goes into. The shank size is determined by the trailer hitch class you are purchasing: Class I & II: 3/4″ Diameter.
Which weight distribution hitch?
All that said, weight distribution hitches can be particularly useful for SUVs, for which the fifth-wheel/goose-neck hitch option isn’t available but the towing capacity is still high enough to haul a load that would create a significant amount of weight on the tongue. Once the trailer is hitched up, loading it is the next adventure.
What is a weight carrying trailer hitch?
The simplest form is the weight-carrying hitch, which sits on the bumper of the tow vehicle and carries the entire weight of the trailer tongue . These common hitches are considered safe for extremely lightweight trailers. As the trailer weight rises, though, a weight-distributing hitch rapidly becomes essential. A weight-distributing hitch attaches to a receiver that is mounted beneath the bumper on the frame of the tow vehicle.
What is weight distribution system?
A weight distribution system will combat problems that often occur with standard hitch systems by using spring bars. The spring bars will help distribute the weight to all axles. A standard hitch often pushes down the rear of your tow vehicle resulting in the trailer leaning forward.
What is a trailer shank?
A shank is the hole in the ball mount that the trailer ball goes into. The shank size is determined by the trailer hitch class you are purchasing: Class I & II: 3/4″ Diameter.