What is a 13 pin connector?
A 13 pin plug is used when towing objects, such as your caravan or an advanced trailer, boat trailer or horsebox. This plugged gives you all the light functions including reverse, it can also supply the permanent and fridge feeds. This plugs into the 13 pin socket mounted on the tow bar.
What’s the difference between a 7 pin and 13 pin towbar?
The difference between a 7-pin and 13-pin plug is that a 13-pin plug has more functions. A 7-pin plug only supplies in basic lighting, such as blinkers and brake lights. The additional pins in the 13-pin plug are used for the reversing lights and the rear mist light, among other things.
Why do I need a 13 pin transmission adapter?
It leaks transmission fluid to the 13 pin connector and causes the car to loose communication with the valve body.This is a common problem on the Mercedes Benz cars from 1998- up to 2008. A lot of times people or even mechanics misdiagnose transmission problems, thinking they need a new valve body or even transmission.
How to replace the 13 pin plug on a Mercedes Benz?
Mercedes Benz Transmission Dipstick reference number 140-589-1521-00. How to replace the 13 pin plug, aka the famous transmission O rings. If playback doesn’t begin shortly, try restarting your device.
How to replace a Mercedes transmission plate adapter?
Please try again later. Part Number 2035400253 , 2035400153 , 2035400053 , 1402700250 , 203 540 02 53 , 203 540 01 53 , 203 540 00 53 , 140 270 02 50 Mercedes Transmission Conductor Plate Connector Adapter Genuine OE 722.6
How do you replace a transmission connector plug?
You may to remove the plastic cover to get to the connector. Remove the torx bolt at the bottom of the metal shield. Twist the connector down. Pull the cable out and see if there is oil at the pins. Remove the 7 mm bolt in the center of the famous connector.
How to remove transmission valve body conductor plate?
Locate and remove the T30 Torx bolts that hold the valve body and conductor plate assembly in place. Do this in a zig-zag pattern. Lower the valve body assembly from the car. Working on a clean table or workbench, remove the yellow plastic covers at the top side of the conductor plate.
It leaks transmission fluid to the 13 pin connector and causes the car to loose communication with the valve body.This is a common problem on the Mercedes Benz cars from 1998- up to 2008. A lot of times people or even mechanics misdiagnose transmission problems, thinking they need a new valve body or even transmission.
Where can I get a Mercedes transmission conductor plate?
My conductor plate was the culprit with little cracks and this kit did the job of replacing that. I still had to clear the trans code at a local mercedes indy before full function was realized This was the right choice in the end. I almost ordered the wrong part from another seller.
How to change conductor plate on Mercedes 722.6 5G transmission?
Instructions on how to change the conductor plate and valve body on Mercedes-Benz 722.6 5G transmission. Allow the car to cool down. Raise your car using a car lift, ramps, or jack stands. Secure the vehicle with jack stands. Set parking brakes.