What does the serpentine belt on a Honda Accord do?
The serpentine belt in your Honda Accord drives the alternator, air conditioning, power steering, and water pump. Note: PracticalMechanic.com is reader-supported. If you buy through links on our site, we may earn an affiliate commission – at no cost to you.
How to replace the power steering belt on a Honda Accord?
Place a 4-by-4 inch wood block behind one of the rear tires to keep the vehicle from rolling back. Slide underneath the vehicle engine and remove the cowling under the passenger side of the engine by unfastening the bolts with a metric socket wrench.
What makes up the serpentine belt in a car?
A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump.
When to replace serpentine belt on VW Jetta?
Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump. Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles.
What happens if the serpentine belt on a Honda Accord breaks?
As this belt drives the A/C compressor, alternator, power steering pump, and water pump, it is not something to take lightly. If you hear it squealing, see it deteriorating, or having issues with it, get it changed as soon as possible. If it breaks, the water pump stops and the engine will quickly overheat, leaving you stranded on the road.
Place a 4-by-4 inch wood block behind one of the rear tires to keep the vehicle from rolling back. Slide underneath the vehicle engine and remove the cowling under the passenger side of the engine by unfastening the bolts with a metric socket wrench.
How do you set the power steering belt?
The belts on these vehicles don’t have automatic tensioners like the newer vehicles do. The tension has to be set with a bolt on the alternator and power steering pump respectively. I personally set the belt by feel if a firm push with 1 finger yields about 1/2″ of deflection at the center of the belt between two pulleys you’re good.
How to find a genuine Honda Accord drive belt?
Enter your VIN for the most accurate results. Enter your VIN for the most accurate results. We offer a full selection of genuine Honda Accord Drive Belts, engineered specifically to restore factory performance. Please narrow the Serpentine Belt results by selecting the vehicle.
How is the serpentine belt in a Chev?
Pictures, diagrams of serpentine belt routing. 2.4L. Belt Diagram 3.4 DOHC Cam Engine Drive Belt Diag… 3.5L Engine Serpentine Belt in Chev… 4.2L Inline Six Cylinder Engine Bel… 3800 V6 Belt Routing Picture and Ro…
Which is the best belt for Honda Accord?
As others have written, if the tensioner is functioning properly now, it’ll be fine with your new belt setup. Dayco makes some good belts, as long as you stay with their higher end lines. Dayco makes some good belts, as long as you stay with their higher end lines.
How do you release tension on a Honda Accord?
To release the tension on the tensioner pulley, put a 14mm wrench onto the nut-head on the tensioner pulley (A), and pull the wrench toward the front of the car as shown. On the Honda Accord, this is a 14mm hex head on the tensioner pulley.
Enter your VIN for the most accurate results. Enter your VIN for the most accurate results. We offer a full selection of genuine Honda Accord Drive Belts, engineered specifically to restore factory performance. Please narrow the Serpentine Belt results by selecting the vehicle.