What does the p1298 Honda engine code mean?
Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P1298 HONDA code is 1.0 hour of labor.
Where is the trouble code on a Honda Accord?
The ECU is located under the driver’s seat. With the ignition switch in the “on” position and the engine OFF, the red LED on the ECU will flash the trouble codes. For example, 2 flashes, pause, 3 flashes would mean code 23.
What does DTC stand for on Honda Accord?
95–97 Accord V6 & 96–97 Accord 4 Cyl. If the malfunction indicator/Check Engine lamp remains lit or comes on while the engine is operating, the ECM has detected a malfunction and has stored a DTC in its memory. To access the DTC memory using a scan tool, connect the Honda PGM Tester or an OBD II scan tool to the 16-pin DLC.
Where is the ECU on a Honda Accord?
The ECU is located under the passenger’s seat. Codes are displayed on a series of four LEDs. With the ignition switch in the “on” position and the engine off, codes will be displayed in ascending order. Note: Red * indicates LED on.
What is the p1381 code on a Honda Accord?
If not, replace the distributor housing, if it is ok check for continuity to ground between each terminal ( same ones ) and body ground. If there is continuity replace the distributor . Here is a picture of the coil shield location. The P1381 code is Cylinder Position Sensor Intermittent Interruption.
How much does it cost to repair a p1381 Honda engine?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1381 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
What does the p1381 Honda cylinder position sensor do?
P1381 Honda Description. The Crankshaft Position (CKP) Sensor determines timing for fuel injection and ignition of each cylinder and also detects engine speed.
What is the CYP sensor on a Honda Accord?
Cylinder Position (CYP) Sensor detects the position of No. 1 cylinder for sequential fuel injection to each cylinder. The CKP/TDC/CYP Sensor is built into the distributor.