What does engine code P0107 mean?

What does engine code P0107 mean?

P0107 is the general code for a problem with the MAP circuit sensor having too low voltage input to the Engine Control Unit (ECU). This means the voltage input to the ECU is . 5 volt or less which means that it is not in the correct lower range for proper engine operation.

What does the p0107 code in OBD mean?

What the P0107 code means. P0107 is the general code for a problem with the MAP circuit sensor having too low voltage input to the Engine Control Unit (ECU). This means the voltage input to the ECU is .5 volt or less which means that it is not in the correct lower range for proper engine operation.

Are there additional trouble codes for Harley Davidson?

In 2008 additional codes were added and are not covered here. The descriptions here are for reference only and do not replace the diagnostics that only a skilled technician can provide. Seek the assistance of a qualified Harley technician to accurately diagnose trouble codes or other conditions.

Is there a trouble code on the speedometer?

Speedometer Self Diagnostics: The speedometer is capable of displaying and clearing speedometer, tachometer, TSM/TSSM and ICM/ECM Diagnostic Trouble Codes (DTC). Trouble codes are read via the odometer.

What does no RSP mean on a Harley Davidson?

“No Rsp” will also appear if the run/off switch is in the off position when doing this procedure. Also if the code set is a historic code (not a constant light) after 50 start and run cycles of at least 30 seconds each in duration, the light will extinguish itself as long as the error hasn’t occurred again.

What is the p0374 code on a Harley Davidson Sportster?

Press and release the odometer button to return to the module selection menu. Turn off the ignition to exit the menu. The P0374 code is notorious on the 2004 and later Sportsters. This code relates to the crank shaft position sensor.

What the P0107 code means. P0107 is the general code for a problem with the MAP circuit sensor having too low voltage input to the Engine Control Unit (ECU). This means the voltage input to the ECU is .5 volt or less which means that it is not in the correct lower range for proper engine operation.

How to get the trouble code on a Harley Davidson Sportster?

If a module has a “Y” next to it, a trouble code is present. Press and hold the odometer button for five seconds and the trouble code will be displayed. Record the code for later. Figure 1. The trip button on 2014 and newer Sportsters.

What does the Code 02 mean on a Harley Davidson?

If it were a current code, the light would remain lit while running. Above codes can also be set if 02 sensor fails. CKP – Crank Position Sensor. The CKP generates an “AC signal” which is sent to the ECM where it is used to reference engine position (TDC) and speed.

Posted In Q&A