What causes a high temp ECT on a Harley Davidson?
P1019 ECT Difference (high temp) Possible causes: ECT sensor malfunction. No air flow through radiators. Low or no coolant in system. Could also be wiring, cooling pump or ECM. Diagnostic test: 1. Check radiators are clean & free of debris. Verify coolant level. 2. Cooling pump test.
How to view and clear Harley diagnostic trouble codes?
Viewing and clearing DTC’s: (Clear codes at your own risk)(Make sure you know what you are doing or consult a Harley mechanic) Push the odometer button and release to scroll through the different modules and codes. If an item has a “Y” next to it then you have trouble code.
How to check for a DTC on a Harley Davidson?
This application is designed for Harley Davidson owners to lookup Diagnostic Trouble Codes (DTCs) that are reported by the engine and read about what they mean and possible causes and resolutions. Here is how it works. You run Harley DTC and enter the DTC code you wish to lookup.
When does the Check Engine light come on?
I put about 150 miles on it and then pulled the fairing off to replace the stock mirrors with fairing mounted type …..and now the “check engine light” and charging light both light up about a minute after starting the bike. The bike had the stock battery from 2007 in it which I replaced with a new one.
P1019 ECT Difference (high temp) Possible causes: ECT sensor malfunction. No air flow through radiators. Low or no coolant in system. Could also be wiring, cooling pump or ECM. Diagnostic test: 1. Check radiators are clean & free of debris. Verify coolant level. 2. Cooling pump test.
How to check engine light on Harley Davidson?
Turn Ignition switch to OFF & Run/Stop switch is to Run. Push odometer reset button in & hold. Turn ignition switch to Ignition and release odometer reset button. Background lighting should illuminate, speedometer needle should sweep its full range and indicator lamps (battery, security, low fuel, check engine and cruise) should illuminate.
What does the Check Engine light on a Dyna Glide mean?
The check engine light is designed for a reason; it is there to tell you that there is something wrong with your Harley Davidson Dyna Glide. The dealership will charge you over $100 to read and clear the code for you. The good news is, you can do the very same thing for free.
How to check low fuel on a Harley Davidson?
3- Turn ignition switch to Ignition and release the odometer reset button. Background lighting should illuminate, speedometer needle should sweep its full range and indicator lamps (battery, security, low fuel, check engine and cruise) should illuminate.