What are the transfer case parts for a Jeep CJ?
Jeep Transfer Case Parts for 1945-86 Jeep CJ-2A, CJ-3A, CJ-3B, CJ-5, CJ-6, CJ-7. Dana 300 Transfer Case Parts, Dana Spicer 18 and Dana Spicer 20 Transfer Case Parts
What’s the difference between Dana and Jeep transfer cases?
Another difference is that the Model 20 transfer cases have the power to the rear axle directly in line with the transmission, while the Dana 18 has the power offset to the passenger side. On all Jeep vehicles 1941-79, equipped with the Dana Spicer 6 spline transfer case, you will have the largest selection available for transfer case adapters.
What was the reduction ratio on a Jeep transfer case?
These transfer cases have a four position shifter that provides two gear ratios in 4WD, one ratio in 2WD, and a neutral position. Four wheel drive low provides a reduction ratio of 2.03:1 on the Dana 20, and a 2.46:1 on the Dana 18. The controls varied from a dual lever design to a single lever on the later models.
Can a transfer case be changed between years?
The bolt pattern on the input side has always remained the same, so transfer cases can be interchanged between years – with some exceptions. These exceptions include: the indexing or alignment bearing retainer that protrudes from the back side of the transmission.
Jeep Transfer Case Parts for 1945-86 Jeep CJ-2A, CJ-3A, CJ-3B, CJ-5, CJ-6, CJ-7. Dana 300 Transfer Case Parts, Dana Spicer 18 and Dana Spicer 20 Transfer Case Parts
Another difference is that the Model 20 transfer cases have the power to the rear axle directly in line with the transmission, while the Dana 18 has the power offset to the passenger side. On all Jeep vehicles 1941-79, equipped with the Dana Spicer 6 spline transfer case, you will have the largest selection available for transfer case adapters.
How long is the warranty on a Jeep transfer case?
Transfer Case Assemblies are delivered with 12 month unlimited mile warranty, from time of purchase. When ordering please provide vehicle make, year, model,, transfer case model number and assembly numbers off existing transfer case tag, this information will ensure that you receive a direct drop in replacement.
These transfer cases have a four position shifter that provides two gear ratios in 4WD, one ratio in 2WD, and a neutral position. Four wheel drive low provides a reduction ratio of 2.03:1 on the Dana 20, and a 2.46:1 on the Dana 18. The controls varied from a dual lever design to a single lever on the later models.
Are there any clutch parts for a Jeep CJ?
We carry the largest selection of Jeep CJ Series Clutch Parts around! If you are looking for OEM Jeep Replacement Clutch Parts or want to upgrade your CJ Series clutch parts we have everything that you will need for your CJ!
Where is the bleed hole on a Jeep transfer case?
This seal can be omitted on transfer case adapter installations, provided a gasket or silicone seal is used in between the adapter and the transfer case. The original Jeep adapters have a small bleed hole that is located between the two seals.
We carry the largest selection of Jeep CJ Series Clutch Parts around! If you are looking for OEM Jeep Replacement Clutch Parts or want to upgrade your CJ Series clutch parts we have everything that you will need for your CJ!
This seal can be omitted on transfer case adapter installations, provided a gasket or silicone seal is used in between the adapter and the transfer case. The original Jeep adapters have a small bleed hole that is located between the two seals.
Where is the seal on a transfer case?
The transmission adapter housing normally has a seal that is installed with the open side towards the transmission. This seal can be omitted on transfer case adapter installations, provided a gasket or silicone seal is used in between the adapter and the transfer case.