Is there an aftermarket upgrade kit for Saab?
An updated PCV kit was inttroduced by Saab to address these problems. This aftermarket kit contains all parts included in the Saab update kit. Please note that this kit only contains those parts specified in the Saab upgrade kit. It does not include other PCV parts that are not part of the upgrade.
Where is the PVC box on a Saab 05?
The 05 has a different pvc system. It has a hole in the back of the block that goes directly into the pvc box behind the engine.
What are the problems with the Saab 9-3 Trionic 7 engine?
Crankcase ventilation (PCV) upgrade. A well-publicised problem with the Saab 9-3 and 9-5 Trionic 7 engines is failure of the positive crankcase ventilation system, leading to oil leaks and blocking of the oil pickup, and also contributing to the well-known sludging problem. An updated PCV kit was inttroduced by Saab to address these problems.
Where is the check valve on a crankcase?
Fit the crankcase ventilation hose in place so that the check valve is located above the coolant hoses. The crankcase ventilation hose must follow the route of the lower coolant hose through the intake manifold and then on to the oil trap. 16. Connect the oil trap’s upper hoses.
How do you replace a crankcase in a Saab 9-5?
1. Disconnect the battery’s negative cable. 2. Remove the upper engine cover. 3. Fit a new oil filler pipe. 4. Remove the hose from the pipe connection on the turbo’s intake manifold. 5. Remove the hoses from the nipple in the camshaft cover. Check the condition of the hoses, replace if necessary. 6.
Where is the coolant hose on a Saab Turbo?
Connect the new hose kit (with T-connection) between the nipple on the oil filler pipe and the connection on the turbo’s intake manifold. 14. Fit the insulation under the throttle body’s coolant hoses so that the insulation’s short sides point upward.
A well-publicised problem with the Saab 9-3 and 9-5 Trionic 7 engines is failure of the positive crankcase ventilation system, leading to oil leaks and blocking of the oil pickup, and also contributing to the well-known sludging problem. An updated PCV kit was inttroduced by Saab to address these problems.
Fit the crankcase ventilation hose in place so that the check valve is located above the coolant hoses. The crankcase ventilation hose must follow the route of the lower coolant hose through the intake manifold and then on to the oil trap. 16. Connect the oil trap’s upper hoses.