Is the service passive entry indicator still on?
The light and error were still there. later I went back to my car and the light and error was still there so I pushed the button to just to turn the car on but not start it to run (push button without pushing brake) and it’s like the car reset itself. the light and error are gone.
How do you reset the service interval indicator?
Use the directional keypad to turn on the SERVICE INTERVAL mode and set the applicable interval. Turn the ignition off and then start the engine to verify the indicator has been reset. Done! If playback doesn’t begin shortly, try restarting your device.
How to reset the service light indicator Ford Kuga?
Hold both pedals down for around 15 to 25 seconds until you see the message _Service: Oil reset in progress on the instrument cluster display. Continue to hold until you see the message _Service: Oil reset complete. That’s it, you have how reset the service oil reminder message on your Ford Kuga. Turn off the ignition.
Is there a service required indicator for the Tucson?
2016-2017 Hyundai Tucson Service Required Indicator Reset. 2016-2017 Hyundai Tucson Service Required Indicator Reset – The Hyundai Tucson is a sports utility SUV segment D produced by South Korean manufacturer Hyundai since 2004. In the alignment of the brand, the Tucson fits below the Hyundai Santa Fe and the Hyundai Veracruz.
What to do if perform service indicator does not reset?
Turn the ignition switch to the OFF/LOCK position. NOTE: if the indicator message illumination when you start the vehicle, the “Perform Service” indicator did not reset. If necessary repeat this procedure.
The light and error were still there. later I went back to my car and the light and error was still there so I pushed the button to just to turn the car on but not start it to run (push button without pushing brake) and it’s like the car reset itself. the light and error are gone.
How to reset perform service indicator on Dodge 6.7L?
This bulletin is to aid you on resetting the Perform Service indicator you will find on a Dodge 6.7L with the EVIC displaying this message. PERFORM SERVICE INDICATOR- RESET the “Perform Service” message will display on the EVIC each time you turn the ignition switch to the ON/RUN position to indicate emission maintenance is required.
How to reset service indicator on Hyundai Tucson?
If the service interval menu is activated, you may adjust the time and distance at a specific interval Use the directional keypad to turn on the SERVICE INTERVAL mode and set the applicable interval. Turn the ignition off and then start the engine to verify the indicator has been reset.