Is the Carrera 4 a rear wheel drive car?
Nearly everyone on this launch got carsick. The Carrera 4 (C4) version of Porsche’s venerable 911 is-as you may be aware-an all-wheel-drive model commanding about a $7000 premium over the cost of the rear-wheel-drive 911.
Where are the ground locations on a Porsche 911?
The grounds used in Porsche 911 Carrera models from 1985 to 1989 are shown in Table a. Table a. Ground Locations (Quick Reference) Luggage compartment, left (on inner fender panel at rear of fuse box)
How to replace the window switch on a Porsche Carrera?
To remove or replace the window switches you will need to remove the door panel. (see Pelican Technical Article: Porsche 911 Carrera Door Panel Removal ). Once the panel is off, you can remove the window switch by first disconnecting the wiring. Squeeze the tap (red arrow) and pull straight back.
What’s the price of a Porsche Carrera 4?
The Carrera 4 (C4) version of Porsche’s venerable 911 is-as you may be aware-an all-wheel-drive model commanding about a $7000 premium over the cost of the rear-wheel-drive 911.
Are there any parts for a Porsche Carrera?
Parts and accessories for the wide range of 911 Carrera models, including Turbo, GT3, & GT2 models. CLICK HERE Porsche Boxster Boxster Parts and accessories for the Boxster model range.
Why is the Porsche 911 Carrera 4 all wheel drive?
That’s why the twin-turbo horizontally opposed engine, the transmission, the chassis, the brakes and all the control systems are designed for one thing: the highest performance. The ‘4’ in the Porsche model designation represents the four driven wheels in all-wheel drive models.
To remove or replace the window switches you will need to remove the door panel. (see Pelican Technical Article: Porsche 911 Carrera Door Panel Removal ). Once the panel is off, you can remove the window switch by first disconnecting the wiring. Squeeze the tap (red arrow) and pull straight back.
What kind of body panels do Porsche 911s have?
Complete door skin without collision reinforcement for the front left side of 911 2.4-3.04 (1972-1977) models. Complete door skin without collision reinforcement for the front right side of 911 2.4-3.04 (1972-1977) models. Cowl panel support bracket for 911 and 912 (1965-1986) models.