Is cylinder head cover same as valve cover?
Yes, as mentioned in the other thread, same thing.. cylinder head cover gaskets=valve cover gaskets.
Can I replace head gasket without machining?
It takes more than just checking whether it is straight. It can be perfectly straight, yet, have erosion issues that will make it very questionable whether the head gasket job will last. I would say, if you aren’t absolutely sure, spend the money up front to have it skimmed.
How do you remove the cylinder head on a Toyota?
Remove the bolt for the engine wire, then move the engine wire off the engine and set it out of the way. Unplug the fuel injectors. Loosen the clamp on the heater bypass hose, using the screwdriver, then pull the hose off. Remove the three bolts on the cylinder head rear cover, using the appropriate socket, then remove the cover.
How to replace cylinder head gasket on Toyota Corolla?
Toyota Corolla Repair Manual/ Emission control/ Cylinder head gasket/ Replacement 1. Work for preventing gasoline from spilling out 2. Remove engine under cover rh 3. Drain coolant 4. Remove front wheel rh 5. Remove cylinder head cover no.2 Remove the 2 nuts, 2 clips and cylinder head cover. 6. Remove air cleaner hose no.1
Why do I need to remove cylinder head on my Toyota VVTi?
I’m not gonna ask why would you need to remove the cylinder head from a Toyota VVTi engine, but I suppose something wrong happened and you need to change some valves or rectify the whole cylinder head, here’s a tutorial on how to do it.
How do you replace a gasket on a 1987 Toyota pick up?
Remove timing chain cover bolt from front inside of cylinder head. The timing chain cover bolt must be removed prior to removing head bolts. Gradually loosen and remove cylinder head bolts in two or three steps as shown in Fig. 45. Remove rocker arm assembly from cylinder head, then remove cylinder head.