How to tighten the belt on a Subaru?
Tighten the belt using the adjusting bolt, and re-tighten the lock nut. This is where thing are a little tight and using the stubby wrench and offset wrench came in very handy.
Where is the serpentine belt on a Subaru Forester?
Place the new belt onto the engine pulleys. Almost every Subaru Forester engine will be set up differently, so you will need to use the drive serpentine belt diagram on the plastic cover above the radiator. Turn the wrench that is connected to the nut in the center of the tension pulley clockwise to tighten the new belt.
How to remove accessory belt from Subaru alternator?
To get the first cover off, remove the nut on the right side of the cover, then remove the bolt on the left side. To remove the second cover, remove the bolt on the left. Then loosen the bolt on the right (on the side of the alternator). Its a long bolt that goes clear to the back side of the alternator.
Can you change the accessory belts on a Subaru Impreza?
Here is how to change the accessory drive belts on a Subaru Impreza car. It is easy to do a belt change and a belt adjustment on the Subaru Impreza. There are just a few small simple tricks you need to know about how it is all constructed. Subaru Impreza has 2 Accessory drive belts, and you should replace both of them at the same time.
Where do you put the belt on a Subaru Forester?
Pull the belt off of the engine pulleys and set the belt aside. Place the new belt onto the engine pulleys. Almost every Subaru Forester engine will be set up differently, so you will need to use the drive serpentine belt diagram on the plastic cover above the radiator.
When to change the timing belt on a Subaru?
The recommended change time for a timing belt on a Subaru is actually pretty impressive compared to most other models of vehicles. Depending on what other kind of car we’re talking about, the scheduled maintenance for a timing belt is usually between 60,000 miles and 100,000 miles.
How long does it take to replace a serpentine belt?
The serpentine belt is the large black belt that connects to each round engine pulley. The engine pulleys are what power the components that are on the engine, such as the alternator. Replacing the serpentine belt is not difficult to do and no major tools are needed. You can replace the serpentine belt in your driveway in 15 minutes or less.
How to replace alternator belt if air conditioner is broken?
How to replace alternator belt if the air conditioner is broken, you can use a short serpentine belt without air conditioning. How to replace alternator belt if the air conditioner is broken, you can use a short serpentine belt without air conditioning. Skip navigation Sign in Search Loading… Close This video is unavailable. Watch later Share
What happens when my AC belt breaks in a Subaru?
the A/C belt is dedicated on your car and not shared by anything else so you can remove it with no issues except obviously your A/C won’t work, but you’re not using it anyway to avoid the extra strain on it. they only take a few minutes to replace too, it’s really easy.
Where is the tensioning screw on a Subaru?
First picture is the engine with the plastic cover removed, second picture is the removed bracket, third is the alternator prior to belt removal. Tensioning screw is immediately to the left of the alternator, locking screw (pivoting) is on the right. ► Edit – moderator’s note – the images on this post have been saved to the forum server.
Tighten the belt using the adjusting bolt, and re-tighten the lock nut. This is where thing are a little tight and using the stubby wrench and offset wrench came in very handy.
When to replace AC belts on Subaru Forester?
You want to lower the alternator, you might need to push down on it some, mine seemed pretty tight until i put some weight on it to lower it. once the alternator is lowered you can pull off the belts and replace the ac pulley setup. it might be a good time to replace the belts as well.
Where can I get an AC belt tensioner for my Subaru?
Go to the dealer and have them pull up a blow out parts sheet and pick which one you need. Anyway try a search with the topic ” ac belt ” or “power steering belt” should get you everything you need to know. Good luck and don’t bust your knuckles on the radiator fan shroud. It will make strange words come out of your mouth.
To get the first cover off, remove the nut on the right side of the cover, then remove the bolt on the left side. To remove the second cover, remove the bolt on the left. Then loosen the bolt on the right (on the side of the alternator). Its a long bolt that goes clear to the back side of the alternator.