How to test stator on Polaris 700 xcsp?
To test the stator you have to test the resistance between the wires. Unplug all plugs from the harness and test the resistance from the green wire to the black with red. It should be 15 ohms. The reading between the green and red should also be 15 ohms. The resistance between the white and white with red should be 185 ohms.
Is there a spark on a Polaris 600?
We then disconnected the ignition switch and still no spark. We towed it to a repair shop and they pulled a coil pack from an 01 Polaris 600 and still no spark. Put the original one on and then changed out the CDI box. Not sure if it is the same box or not, but still no spark. So we put the original back on.
Why is the stator still making power on my snowmobile?
The stator is still making power because when I pull the cord the headlight tries to turn on, but still no spark.
What’s the CDI number on a 97 RMK / SKS?
Went out and looked at the CDI box, the number that is on there is the number that you listed for the ’97 RMK/SKS…the 4060144, so should I get another one of that, or get the right one? Ebay,there were like 5 or 6 of them a couple days ago on there,and a couple buy it now.
To test the stator you have to test the resistance between the wires. Unplug all plugs from the harness and test the resistance from the green wire to the black with red. It should be 15 ohms. The reading between the green and red should also be 15 ohms. The resistance between the white and white with red should be 185 ohms.
Where does the spark plug go on a stator?
-The two primary terminals on the ignition coil are shared by multiple components, and therefore will have two wires coming out of each. -The raised center terminal on the ignition coil feeds the power that goes to the spark plug. This is where the spark plug wire will connect.
What happens if you don’t have a stator coil?
The stator coil generates the power for the spark plug and other accessories on small engines Without a stator there would be no spark at all, meaning the engine won’t run. While a stator is dying, it can produce a weak spark, causing the engine to miss or run poorly. Symptoms are often worsened as the engine warms up.
What should I do if my Honda stator is weak?
Note that as written this system will bypass the CDI portion of your ignition system (if present) and replace it with a more traditional one. I devised this system when the stator on my Honda XR-100 got so weak that it couldn’t power the spark plug, preventing the engine from running.