How to reset your Chevy or GMC oil change light?

How to reset your Chevy or GMC oil change light?

Here’s the easy way to reset the oil light on your Chevy or GMC. Oil lights have been a standard feature on Chevy and GMCs for years. Newer Chevys will have a built in Vehicle Information Center (VIC), but older models don’t. If your GMC is 2006 or newer, it comes with the GM Oil Life System.

How often do you change the oil on a Chevrolet?

The motor oil and filter must be changed at least once a year and the Engine Oil Life System will need to be reset. Your Chevrolet dealer has Certified Service expert technicians who will perform this work and reset the system.

How do you change the oil on a Honda Accord?

Within five seconds of turning the key, depress the accelerator fully to the floor three times. 3. Watch for the oil light to flash and turn off. If the oil change light does not turn off, turn the key to the off position and retry the process. 1. Turn the key to the accessory power position. 2. Locate and press the VIC button.

How do you check the oil life on a Chevy?

Locate and press the VIC button. The VIC button will have an image of a road or the letter “i” on it. Repeatedly pressed the VIC button until “oil life” is displayed on the onscreen menu. 3. Press and hold the check mark button on the VIC for five to ten seconds until the oil life display reads 100%.

Here’s the easy way to reset the oil light on your Chevy or GMC. Oil lights have been a standard feature on Chevy and GMCs for years. Newer Chevys will have a built in Vehicle Information Center (VIC), but older models don’t. If your GMC is 2006 or newer, it comes with the GM Oil Life System.

How do you change the oil in a Vortec engine?

Open the hood and remove the black oil-filler cap from the top of the engine. Pour four and one-half qts. of new engine oil into the engine. Replace the oil cap and close the hood. The Vortec engine oil will drain faster if you allow the engine to warm up slightly before you start this job.

Locate and press the VIC button. The VIC button will have an image of a road or the letter “i” on it. Repeatedly pressed the VIC button until “oil life” is displayed on the onscreen menu. 3. Press and hold the check mark button on the VIC for five to ten seconds until the oil life display reads 100%.

How much oil is in a Chevy truck?

Chevrolet Light Truck refrigerant and oil capacity charts Year Model Refrigerant Oil All Engines w/ Front AC Only 48.00 8.00 1990-1991 All Engines w/ Front & Rear AC 60.00 10.00 All Engines w/ Front AC Only 36.00 8.00 1989 All Engines w/ Front & Rear AC 60.00 10.00

What to do if your oil change light does not turn off?

Watch for the oil light to flash and turn off. If the oil change light does not turn off, turn the key to the off position and retry the process. 1. Turn the key to the accessory power position.

How do you reset the oil light on a Honda Accord?

While the oil life message is displayed, press and hold the Enter button on the Driver Information Center for one second. 3. The Driver Information Center will display a reset acknowledgement message. Turn the key to the off position. After you’ve reset the oil light, turn the key to the off position.

How does the Check Engine oil level light work?

Just like the windshield washer level indicator, it is only a mechanical switch. When liquid is added and the level rises, the switch turns off. You have damaged the contact/wiring/plug and the level system is indicating low. that is what I believed originally, Ray, but wanted to be sure. Are you aware of any dedicated fuse for that function?

Why does the Check Engine light come on when the oil level is low?

If the oil level sensor is working correctly, it will trigger the oil light to come on your car, truck or SUV when the oil level is low. It’s also common for it to trigger the check engine light if the sensor is damaged or faulty in any way.

How to replace the oil level sensor on a GM vehicle?

In this video we replace the oil level sensor in a 2006 pontiac grand prix, however this procedure is identical in pretty much all newer GM vehicles (Silverado, Sierra, Tahoe, Camaro, Corvette, Impala, Malibu, etc). It’s a pretty common failure, and extremely easy an inexpensive to replace.

Watch for the oil light to flash and turn off. If the oil change light does not turn off, turn the key to the off position and retry the process. 1. Turn the key to the accessory power position.

Posted In Q&A