How to replace steering lock on Mercedes W204?
Working below the dash first remove the two bolts by the steering knuckle (red arrows) and then the bolts closer to the dash (yellow arrow) The steering shaft will be free once the bolts are removed so gently lower it while removing the last two bolts. Disconnect the wiring connection for the lock along the left side of the shaft (red arrow).
How to replace the steering column on a Mercedes Benz?
Next, remove the steering column switch module (red arrow) and trim surround. This comes off as one unit so please see our article on steering column for further information.
Why does my Mercedes W204 C class not start?
Quite often mistaken for a dead vehicle battery, the w204 bodied Mercedes-Benz C-class suffers from a fault that will unfortunately leave you stranded at the best of times. Quite often we get a phone call from a customer telling us their car won’t start, even after replacing the battery.
How to solve Benz steering angle sensor internal fault?
Remove Benz steering angle sensor and check the PCB to ensure if the PCB and optical element are covered with dust. Clear the dust,install them back on vehicle to test. Steering angle sensor is power by TEL7263 IC,if the TEL7263 was damaged,the whole steering angle sensor can not work correctly,it will bring the trouble codes.
What to do if your Mercedes steering column is not working?
You need to turn the key in the ignition several times before lights come on the dashboard; The key turns in the ignition but no dashboard lights appear; Steering is still locked even with the key in the ignition; Steering lock is OFF with no key in ignition.
What’s the problem with the steering column lock?
The actual problem is the STEERING COLUMN LOCK MODULE. In the video below, you can see a Mercedes E200 W212 chassis with the steering column lock module faulty. You can use the vehicle on the same day.
How to reset adaptive shifting points on Mercedes Benz?
This procedure will reset the adaptive shifting points in your Mercedes-Benz automatic Transmission Control Unit (TCU). These simple do it yourself instructions take less than 5 minutes. No tools are required to perform this procedure and make your Mercedes-Benz shift like new. Try this if your car has been shifting sluggish recently.