How to remove the steering knuckle on a Nissan Rogue?
Open the slot using a suitable tool (A). Separate the steering knuckle (1) from the front coil spring and strut. CAUTION: Do not drop steering knuckle. Remove the lower nut and bolt from the steering knuckle. Separate transverse link from the steering knuckle. Refer to FAX-9, “Exploded View”.
How to remove a Nissan Rogue from service?
Remove the lower nut and bolt from the steering knuckle. Separate transverse link from the steering knuckle. Refer to FAX-9, “Exploded View”. Remove the cowl top cover plug to access the upper strut bolt. Remove the upper strut bolts and the front coil spring and strut. Inspect the components. Refer to FSU-6, “Inspection”.
How to connect the stabilizer on a Nissan Rogue?
To connect the stabilizer connecting rod (1), tighten the nut while holding the hexagonal part (A) on the stabilizer connecting rod. Perform the final tightening of the nuts and bolts under unladen conditions with the tires on level ground.
How to remove front wheel sensor from Nissan Rogue?
Separate the harness from the brackets and position aside. Refer to BRC-132, “FRONT WHEEL SENSOR : Exploded View”. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor. Pull out the front wheel sensor, being careful to turn it as little as possible.
How many Nissan Rogue control arms are left?
Only 11 left in stock – order soon. . Only 2 left in stock (more on the way). . Only 5 left in stock (more on the way). . Only 20 left in stock – order soon.
Open the slot using a suitable tool (A). Separate the steering knuckle (1) from the front coil spring and strut. CAUTION: Do not drop steering knuckle. Remove the lower nut and bolt from the steering knuckle. Separate transverse link from the steering knuckle. Refer to FAX-9, “Exploded View”.
Remove the lower nut and bolt from the steering knuckle. Separate transverse link from the steering knuckle. Refer to FAX-9, “Exploded View”. Remove the cowl top cover plug to access the upper strut bolt. Remove the upper strut bolts and the front coil spring and strut. Inspect the components. Refer to FSU-6, “Inspection”.
How to replace the ball joint on a Nissan Rogue?
Move the ball joint at least ten times by hand to check for smooth movement. Move the tip of the ball joint in the axial direction to check for looseness. Axial end play : Refer to FSU-26, “Ball Joint”. If the axial end play exceeds the standard value, replace the transverse link. Installation is in the reverse order of removal.