How to remove the dash from a car?
1. the first step is to remove the inst cluster cover. I have circled the areas where the philips screw will need to be removed. After these screws are out, simply pull the cover towards you, and lift up and it’ll come straight out. 2. The next step is to remove the dash pad. This shot is from the bottom.
How do you remove a Philips dash cover?
1. the first step is to remove the inst cluster cover. I have circled the areas where the philips screw will need to be removed. After these screws are out, simply pull the cover towards you, and lift up and it’ll come straight out. 2. The next step is to remove the dash pad.
How do you remove a dash harness step by step?
Reach behind and feel the tab on the speedo cable (I have it circled below). Pushing on this tab will allow you to release and pull the speedo cable out. After that, the inst cluster will pull out a little more where it will show you the two main harnesses you must remove next.
Are there any screws on the right side of the dash?
2 screws on the right side near the speaker..>NOTE: no need to remove any screws other than what I have circled. These other screws do other things not pertinent to removing the dash. NOTE: there are two screws on the very sides of the dash that mate up to the door..below is a lousy picture of these. These do NOT need to be removed!!
How to remove a car stereo without Din tools by Stereo?
SCOSCHE DT1 DIN Automotive Car Radio Removal Pry Tool Kit REMOVE YOUR VEHICLE FACTORY STEREO: The Scosche DIN tool kit allows you to quickly remove your automotive car stereo easy. Just insert the tool (one on each side) and carefully pull out your radio from the panel for a quick extraction.
How do I remove the Speedo cable from my dash?
Pushing on this tab will allow you to release and pull the speedo cable out. After that, the inst cluster will pull out a little more where it will show you the two main harnesses you must remove next. Pull out on both tabs and the cable will pull out.