How to get a new Pontiac car key?
When calling a dealer to get a Pontiac replacement key, ask if you can pick up the new key yourself, or whether you have to tow the car there. In addition, if the key won’t turn in the ignition, mention if this is something that has happened for the first time or is an ongoing problem.
Why does my 1997 Pontiac Grand Am Not turn off?
This 1997 Pontiac Grand Am came in with the complaint that the ignition switch will not turn all of the way off. This causes two other problems. The key cannot be removed from the ignition lock cylinder and the ignition stays on enough for the systems not to shut down fully. The battery will go dead as a result.
What to do if your key is stuck in the ignition?
There is an accesory relay labeled “r8” in the fuse block thats on the drivers side of the vehicle that controls power to the ignition lock cylinder solenoid. When the relay fails you wont be able to remove the key. If it happens again just swap it for one of the relays around it and see what happens.
Do you need a new ignition key for a Pontiac Firebird?
Furthermore, remember to ask if the key needs to be programmed or coded, some models do – e.g., a replacement key for 2014 Pontiac Vibe will need to be programmed, whereas a 1995 Pontiac Firebird won’t. If you think you need a new ignition switch/ lock cylinder, first make sure you don’t simply need a new key.
When calling a dealer to get a Pontiac replacement key, ask if you can pick up the new key yourself, or whether you have to tow the car there. In addition, if the key won’t turn in the ignition, mention if this is something that has happened for the first time or is an ongoing problem.
How does a GM passkey and PassLock work?
If you see 2.5 volts and the vehicle still won’t stay running, check the fuel pump relay. Here’s how it works, The lock cylinder reads the resistance of the pellet in the key and transmits that data to the theft module. Meanwhile, the PCM provides 5 volts on the dark blue wire.
Is there a way to bypass GM security system?
Scouts Troop 980 of Utah cheers as their ’92 Olds Toronado is coming back to life. Thanks to the NEWROCKIES Full Bypass Module! How to FULLY bypass VATS Passkey and Passlock Security Systems in GM Cars. Has the dreaded GM Security system just hit you?
Where is the transponder on a GM passkey?
This system uses a special key (PK3 stamped on the shoulder of the key) with a transponder under the rubber cover. The receiver module is located next to the lock cylinder. When the key is positioned next to the lock cylinder receiver module, it energizes the transponder which sends a coded signal to the receiver.
Where can I get a new Pontiac Grand Prix key?
So, an automotive locksmith is your only option to get a replacement key. For Pontiac Grand Prix vehicles equipped with a transponder system and/or remote, intelligent key, or fob key, codes are available. However, programming is necessary.
Scouts Troop 980 of Utah cheers as their ’92 Olds Toronado is coming back to life. Thanks to the NEWROCKIES Full Bypass Module! How to FULLY bypass VATS Passkey and Passlock Security Systems in GM Cars. Has the dreaded GM Security system just hit you?
Why did GM change to a PassLock system?
The first generation PassKey systems incorporated a resistor pellet into the head of the key. The resistor made contact with terminals in the lock cylinder and the system read the resistance value of the resistor pellet. These systems had a high failure rate, so GM changed to the PassLock system.
This system uses a special key (PK3 stamped on the shoulder of the key) with a transponder under the rubber cover. The receiver module is located next to the lock cylinder. When the key is positioned next to the lock cylinder receiver module, it energizes the transponder which sends a coded signal to the receiver.
Where is the transponder chip on a Pontiac key?
The next image is of a Pontiac key that has a transponder chip in it and therefore NEEDS to be coded. The chip is located inside the cover at the top. The next image is of Pontiac key that doesn’t contain a chip and therefore DOES NOT NEED to be coded. It’s a simple metal key.
When do I need to replace my Pontiac Vibe key?
This is important so the locksmith can check if he or she has the right key blank/ transponder key/ remote key fob. Furthermore, remember to ask if the key needs to be programmed or coded, some models do – e.g., a replacement key for 2014 Pontiac Vibe will need to be programmed, whereas a 1995 Pontiac Firebird won’t.