How to find the year of my Evinrude 25 hp motor?
All Evinrude boat motors are assigned a serial number by which the manufacturing date of the motor can be determined. Remove the motor from the water if mounted on a boat. Locate the nameplate. It will be in one of two places: on the motor housing or on the mounting bracket.
How do you flush an outboard boat engine?
Start the outboard, and make sure water is coming out of the tell-tale. Let the engine run for at least five minutes. Turn the engine off, then turn off the water and remove the earmuffs. Watch our How to Flush an Outboard Engine video, to see the process from start to finish and learn a few more tips about flushing your outboard engine.
What is the service manual for a Johnson Evinrude?
Johnson – Evinrude Service Manual Application: Outboard & Sea Drive (Sea Drives) For 48 50 55 60 65 70 75 85 88 90 100 110 115 120 135 140 150 175 185 200 225 & 235 HP (Horsepower – Horse Power) Outboard & Sea Drive Marine Engine Johnson/Evinrude 2Stroke 2-Stroke Two Stroke & 4Stroke 4-Stroke Four Stroke models.
Where is the serial number on an Evinrude boat?
All Evinrude boat motors are assigned a serial number by which the manufacturing date of the motor can be determined. Remove the motor from the water if mounted on a boat. Locate the nameplate. It will be in one of two places: on the motor housing or on the mounting bracket. Look at the nameplate.
What’s the proper way to flush an outboard engine?
Be sure the engine is receiving cooling water (by checking the overboard indicator). If your outboard has more than one set of cooling inlets, a flush bag should be used. Flushing Port: Engine should not be running; it can be tilted or vertical. Prop should be removed. Flush for 10-15 minutes.
Where are the Evinrude engines on a boat?
They have compact dimensions, easily transported and mounted on the stern of the boat. Evinrude outboard engines are lightweight and feature quiet operation.
How do you flush an Optimax two stroke outboard?
Optimax two-stroke outboards: Remove the prop, attach flush muffs so that the rubber cups fit tightly over the water intakes, then adjust water flow so that some water leaks out around the cups. Start the engine and run at idle speed in neutral for three to five minutes.
Where is the flush port on a Mercury outboard?
Mercury Mercury’s procedure varies by engine size and series. Smaller and midsize four-stroke outboards use the flush port at the rear of the engine. The engine must be warmed up to open the thermostat and circulate water throughout the engine’s cooling passages completely.
When did the Evinrude Motor Company go out of business?
Within four years the company built over 9,000 boat motors. For the next 91 years, Evinrude produced motors until filing for bankruptcy on December 21, 2000. In 2001, it was acquired by Johnson, one of its competitors, and later that same year, both companies were bought out by Bombardier Inc., which currently produces the Evinrude motor.