How to change the light bulb on a Hyundai Santa Fe?

How to change a low beam, high beam, turn signal or side marker light bulb in a 2013 to 2018 Hyundai Santa Fe.

How to change the front turn signal on a Santa Fe Sport?

Front Turn Signal Change Hyundai Santa Fe Sport (2013-2018) – 2013 Hyundai Santa Fe Sport 2.4L 4 Cyl. Free video instruction on how to replace a burn out front turn signal bulb on a 2013 Hyundai Santa Fe Sport 2.4L 4 Cyl.. Rapid blinking indicates that a turn signal is burnt out on your 2013 Hyundai Santa Fe Sport 2.4L 4 Cyl. About Us Maintenance

How to change a burnt out turn signal bulb?

The video above shows you how to change a burnt out front turn signal bulb on your 2013 Hyundai Santa Fe Sport. If the turn signal (also known as a blinker or flasher) blinks rapidly or doesn’t blink at all / stays stuck when engaged, this is your Santa Fe Sport’s way of telling you that a turn signal bulb is burnt out.

What are the replacement light bulb part numbers?

The replacement light bulb part numbers are as follows: Low Beam # H11 (or possibly an H11B ), High Beam # H7, Front Turn Signal # 2357A and Front Side Marker # 2825. (Please check your old light bulbs before purchasing new ones.

When to change the turn signal on a Toyota Tundra?

We recommend that you change both the driver and passenger side bulbs at the same time as they get dimmer over time and if one is out, then the other one is likely to burn out soon.

How do you replace a low beam headlight bulb?

Push the power plug on to the base of the new H11 bulb until it clicks securely in to place. Note – The owner of a 2013 Santa Fe informed me that their SUV was equipped with H11B low beam headlight bulbs. Please check the part number on your old low beam headlight bulbs before you buy new ones.

Do you need to replace both high and low beams?

Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.

Where is the low beam light bulb located?

The Low Beam light bulb is located at the middle of the headlight assembly. Reach in behind the headlight and rotate the round black plastic dust cap 1/4 turn counterclockwise before removing it. Set the dust cover aside in a safe place.

Where is the low beam light bulb on a Hyundai Santa Fe?

The first two steps are to open the hood and then move to the side of the SUV with the burnt out headlight bulb. The Low Beam light bulb is located at the middle of the headlight assembly. Reach in behind the headlight and rotate the round black plastic dust cap 1/4 turn counterclockwise before removing it. Set the dust cover aside in a safe place.

What happens when you change the headlight on a Santa Fe?

When you change the headlight on your Santa Fe, it is important to not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb. Advance Auto coupon for 20% off entire order: KIOSK20

What kind of light bulb do I need for third generation Santa Fe?

For the third generation Santa Fe, use a low beam bulb with part number # H11. Gently push the electrical contact onto the base of the new # H11 bulb until the plug clicks firmly into place. Insert the low beam bulb into the housing and carefully rotate it clockwise until it is securely in place.

Navigation