How much does it cost to repair a p1334 Saab?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1334 SAAB code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
What is the diagnostic code for a 2003 Saab 9-3?
2003 Saab 9-3 with a PO340 P1312 and P1334. Where do I 2003 Saab 9-3 with a PO340 P1312 and P1334. Where do I start.
What kind of engine is in a Saab 9-5 cel-p1334?
BCPR7ES?) Installed used 2005 DIC TK 3.7, as the old one was TK3.6 and started to give the misfire codes and cranking worse with every time. It was fine first 20 minutes after leaving the workshop, could feel those ~280hp really showing themself for the first time, pushing me in the seat even without Sport mode on.
What is the DIC on a Saab 9-5?
P1312 and P1334 DTCs pertains to respectively cylinder bank 1+2 and 3+4, so the DIC is of course a suspect. P0340 is “Camshaft Position Sensor, malfunction”, however can be set by soothy spark plugs.
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1334 SAAB code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
What is the fault code for a 2006 Saab 9-5?
Just got my 2006 9-5. Fault codes as above (P1312, P1334), plus P0340. Need a new DIC ASAP, correct? P1312 and P1334 DTCs pertains to respectively cylinder bank 1+2 and 3+4, so the DIC is of course a suspect. P0340 is “Camshaft Position Sensor, malfunction”, however can be set by soothy spark plugs.
P1312 and P1334 DTCs pertains to respectively cylinder bank 1+2 and 3+4, so the DIC is of course a suspect. P0340 is “Camshaft Position Sensor, malfunction”, however can be set by soothy spark plugs.
Where is fuse No 17 on a Saab 9-5?
Try taking out the fuse No 17 on the left side dashboard. This removes the error code temporarily, but it will probably be back again soon. Fuse No 17 does the same thing as removing the battery terminal but you do not have to program the radio again. The connector should change too but it’s not the one who gives you your error codes.