How do you reset the TPMS light on a 2009 Hyundai Santa Fe?
You’ll usually find the tire pressure monitor reset button beneath the steering wheel. Drive the car at 50 mph for about 10 minutes. Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it.
What does TPMS mean on a 2009 Hyundai Santa Fe?
As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure indicator when one or more of your tires is significantly under-inflated.
How do you reset the TPMS light on a 2007 Hyundai Santa Fe?
Connect the relearn tool to the vehicle’s OBD-II port in the passenger cabin to upload the sensor readings. Turn off the ignition and re-scan each sensor in the same order. Drive the vehicle for at least 10 minutes above 30 miles per hour to give the system time to reset completely.
What does TPMS on a Hyundai Santa Fe?
TPMS or Tire Pressure Monitoring System is fitted to Hyundai cars to provide a warning of low pressure on any one of four tires on the vehicle.
What does the TPMS light mean on a Hyundai Santa Fe?
Direct TPMS has TPMS sensors are installed in the wheel; if one or more tires indicate low tire pressure, the TPMS sensors will transfer the information to the vehicle’s ECU. An indicator light (low-line TPMS system) or each tire pressure will show on the dash (high-line TPMS system).
What kind of TPMS system does Hyundai Santa Fe have?
An indicator light (low-line TPMS system) or each tire pressure will show on the dash (high-line TPMS system). Type of TPMS system: Direct TPMS: A TPMS relearn is recommended when replacing a sensor.
What are TPMS lights on a Hyundai Sonata?
“TPMS” letters went out recently, the TPMS letters came on again and now are steady on during all times … read more Subaru and Nissan factory training. i put on a new tpms sensor on my 09 hyundai sonata , i drove the car for about 20 minutes and the TPMS light came on , not the light that relates to under inflation.
How to reset the TPMs on a Hyundai?
How to reset the TPMS (Tire Pressure Monitoring System) on Hyundai car Model: Accent, Azera, Elantra, Elantra Coupe, Elantra GT, Entourage, Equus, Genesis, Genesis Coupe, Santa Fe, Santa Fe Sport, Sonata, Tiburon, Tucson, Veloster, Veracruz, Ioniq. Note: Your need TPMS scan tool, is required to perform this procedure.
How do you reset the tire pressure light on a Hyundai?
Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel. Click to see full answer. Beside this, how do you reset the TPMS on a Hyundai Santa Fe?
An indicator light (low-line TPMS system) or each tire pressure will show on the dash (high-line TPMS system). Type of TPMS system: Direct TPMS: A TPMS relearn is recommended when replacing a sensor.
What does it mean when TPMS light comes on on Hyundai?
When the light comes on it means one of the tires is low on pressure or one of the sensors in the tires has failed. Check the tire pressure, inflate all to 35 psi and drive the car, the light should then go out. If not, then one of the sensors has probably failed. Ask Your Own Hyundai Question.
What kind of TPMS system does Hyundai Elantra have?
An indicator light (low-line TPMS system) or each tire pressure will show on the dash (high-line TPMS system). Direct TPMS: A TPMS relearn is recommended when replacing a sensor.
Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel. Click to see full answer. Beside this, how do you reset the TPMS on a Hyundai Santa Fe?