How do you reset the service light on a Volvo S60?
Step 1. Press the start engine button one time. The engine can’t start; Step 2. Press and hold the button to reset the trip odometer; Step 3. Press and hold the “OK” button on the left side steering wheel stalk; Step 4. Press the start engine button again, and hold down until cluster lights turns on; Step 5.
How do you reset the trip meter on a Volvo S60?
Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button; Step 4. With the trip meter reset button still pressed, turn the key to position “II”; Step 5.
What kind of car is the Volvo S60?
2010-2013 Volvo S60 Service Required Minder Light Reset – The Volvo S60 is a medium-high sedan produced by the Swedish car manufacturer Volvo. The car has a four-door and five-seater body and the exterior lines put it in the D-segment, and re-propose the traditional Volvo style in a modern way.
Is there a way to reset the service light?
If you’ve done the maintenance work and now want to reset the light, follow these instructions: Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button;
How do you reset the Check Engine light on a Volvo?
How to Reset a Volvo Check Engine Light. Turn the Volvo’s ignition key to the “II” position in the ignition. Wait for the light on the diagnostic tool to stop flashing. The codes on your Volvo’s electronic control unit should be cleared at this point and the check engine light will reset itself.
What to do when your check engine light comes on?
No matter the situation, when the check engine light comes on in your Volvo, we always suggest stopping by our service center so one of our knowledgeable technicians can properly diagnose and repair your vehicle. Our service technicians have the most up-to-date diagnostic equipment that can quickly read Volvo OBD-II Trouble Codes.
Where is the fuse on a Volvo check engine light?
Open the fuse panel cover under the steering wheel by turning the lock knob counterclockwise and pulling down on the fuse cover. Plug the electrical connector on the diagnostic tool into the pinned input slot in the fuse panel.
Press and hold in the reset button for the trip odometer Turn the key to position II within 2 seconds, while continuing to press trip odometer reset button. For all vehicles from the 2003 model year a general yellow lamp will light when the reset button must be released. Release the reset button for the trip odometer within 4 seconds.
How to reset the odometer on a Volvo S60?
1 Turn ignition to position I (ON.) 2 Press and hold in the reset button for the trip odometer. 3 Turn the key to position II within 2 seconds, while continuing to press trip odometer reset button. 4 Hold the reset button for the trip odometer pressed in until the original value has been reset.
How to repair an ETM in a Volvo?
Step 1: Purchase our repair service online or over the phone. Step 2: After processing your order, we will email you pre-paid shipping labels. Step 3: Send us your old defective unit by dropping off the package to any UPS location, or call UPS to schedule a pickup. Step 4: We will inspect and repair your old module.
Which is contact less TPS sensor does Volvo use?
Contact-less programmable dual-sensor TPS upgrade: Zero wear Hall-Effect dual Throttle Position Sensor, designed and manufactured by XeMODeX. This contact-less TPS design eliminates any friction related TPS failures. XeMODeX TPS sensors are fully programmable unlike the clones out there which are pre-set and locked.
How to reset Volvo time for regular service?
Insert key in to ignition but don’t turn it yet, POS 0. The service reminder indicator lamp illuminates for 120 seconds when the ignition is first switched on. Release the reset button for the trip odometer within 5 seconds. The instrument gives an audible signal when successful.
If you’ve done the maintenance work and now want to reset the light, follow these instructions: Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset button; Step 4.
How to reset engine system service required message?
I have discovered how to reset/clear the text message “Engine System Service Required” and orange triangle. Trip meter T1 and T2 were showing 0.7 miles. Hold down the trip meter reset button. Turn the ignition key on to position 2. Keep holding the trip meter button until the message and orange triangle go off.