How do you know when your wheel bearing is about to break?
The most common and often most-identifiable symptom associated with a bad wheel bearing is noise coming from the wheel or tire area of the moving vehicle. You may mistake this as engine noise, but when you listen closely you are likely to hear grinding or grating that gets louder as the vehicle accelerates.
Why is my ABS brake light not working after wheel bearing is replaced?
If you have the old-style ABS brakes with the metal ring, it’s a possibility you might have damaged the ring when you replace the wheel bearing or installed the sensor improperly. Also, check the sensors for debris build-ups like road grime or axle grease. Sometimes this can interfere with the operation of the ABS sensor.
How big should the runout be on a wheel bearing?
As a rule, most hubs with sealed wheel bearing assemblies should have less than .002 inches of runout. More than that may cause a vibration and/or tell you the bearing is failing.
What to do after a wheel bearing replacement?
To make sure replacement is correct ,you need to reset the computer by removing the battery positive side and make a short with negative side to empty the capacitor .Then again connect the posetive and start the engine .
When to know if your brake rotors are out of balance?
They do not take into account brake rotors or drums that may be out of balance. So when a customer complains about a persistent vibration problem even though you’ve rebalanced the wheels two or three times, it should tell you the balance problem is probably on the vehicle.
What’s the best way to change brake bearings?
You’ll probably need to use a wrench (and/or a hammer) to remove the end of the hub and any anti-lock brake wheel that may be part of your hub. Then, you may need to use a specialized “puller” tool to remove the central bolt. The bearing assembly should come apart easily.
What makes a front wheel bearing go bad?
If a bolt-on hub/bearing, the only thing that makes new bearings go bad is the axle nut not being torqued on tight enough. Also, you may have one bad tire (a tire that is out of round) or a bent wheel. Easiest way to find out is to move the front tires to the rear
Where are the wheel bearings on a car?
This is because the front rotors are often behind the front hubs, which means that to change the rotors you have to pull the hubs off the front spindles, at which point the bearings are practically in your hand. So, if you need to do a front brake job, check the wheel bearings.
When is it time to replace front wheel bearings?
If you feel play, the wheel bearing needs to be adjusted. If you can’t adjust out the play, or if when you spin it you hear and feel noise, it’s time to replace the bearings. On many vintage cars, replacing front wheel bearings is synergistic with replacing the front rotors.
https://www.youtube.com/watch?v=TVUxFGJZuyQ