How do you fix a stuck bathtub drain lever?

How do you fix a stuck bathtub drain lever?

Try spraying some WD-40 down the overflow drain pipe where the plunger sits. The lubrication may help to loosen the stuck plunger tip from the walls of the overflow tube. Use pliers to grip the rod and attempt to lift straight up on the plunger. DO NOT pull at an angle.

How do you remove bathtub drain link?

Both types of linkage systems are simple to replace.

1. Unscrew the trip lever cover plate with a Phillips or flat-head screwdriver.
2. Pull the cover plate away from the tub and lift it straight up to pull the linkage out of the hole.
3. Fish the weight out of the tub with a magnet if the linkage fell apart.

How do you replace a bathtub drain linkage?

How to Replace a Bathtub Drain Linkage

1. Step 1 – Expose the Pipes.
2. Step 2 – Pull Out the Drain Linkage.
3. Step 3 – Check for Broken Linkage.
4. Step 4 – Locate the Drain Assembly and Clear It.
5. Step 5 – Locate Drain Seat.
6. Step 6 – Install New Plunger.
7. Step 7 – Complete Installing New Bathtub Drain Linkage.

How does a tub drain linkage assembly work?

Bathtub drains have two legs, one to the main drain opening and the other to the overflow drain opening. With a pop-up drain, linkage forces the drain stopper up or down by way of a rocker arm. With the plunger type, a hollow brass plunger slides up and down inside the drain assembly to seal the drain opening.

Why won’t my tub drain stay open?

Look for an adjustment nut on the end of the U-shaped plate attached to the handle if the weight is still attached to the linkage. Turn this nut clockwise through three or four rotations with a pair of adjustable pliers to shorten the linkage. Feed the linkage back into the overflow hole and let the weight fall freely.

How do you remove an old bathtub drain?

Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.

What is the best tool to unclog a tub drain?

The Best Clog-Busting Tools and How to Use Them

• The tool: Plumber’s snake. Best for: Deeper clogs that are too stubborn for the plunger.
• The tool: Channel-lock pliers. Best for: Disconnecting the P-trap to clean out a clog.
• The tool: Cup plunger. Best for: Sinks and bathtub drains.
• The tool: Flange plunger. Best for: Toilets.

How do I remove a push and pull drain stopper?

How to Remove a Push-Pull Drain Stopper:

1. Set the drain to its open position.
2. Lift up on the drain stopper’s knob and turn it counterclockwise.
3. After enough turns, the drain stopper should be unscrewed and come free from the drain opening.

What is a trip lever in a tub?

A trip lever drain is a type of mechanism that is found in many bathtub designs. Essentially, the trip lever works as part of an apparatus that allows the stopper to be opened or closed, making it possible to retain water in the tub or release the water into the drain.

What to do if your bathtub drain stopper is stuck?

Turn off the water and gather the tools. You will need: With the bucket underneath, remove the p-trap and set it aside. Remove the pivot rod through the hole in the drain stopper and then remove the sink stopper tailpipe and set it aside. Use the wrench to loosen the nut that is holding the drain where it is.

Why is my trip lever drain stopper stuck?

The trip lever drain stopper that uses a lift bucket plunger can be identified by the fact that the drain opening has no pop-up stopper in it. When problems occur with this type of drain, it is for one of two reasons: The plunger has become stuck in the overflow tube and will not move up and down freely.

Why is the trip lever on my bathtub not working?

The plunger has become stuck in the overflow tube and will not move up and down freely. The rod linking the trip lever to the plunger isn’t adjusted properly, creating a situation in which the lift bucket plunger doesn’t drop down enough to completely seal the drain pipe opening.

How does a lift bucket stopper work in a bathtub?

The lift bucket stopper also has a turn style or trip lever to operate it. However, the plunger inside is used to stop the water. When you activate the plunger, it turns the plate to move the plunger up and down. You cannot see a stopper in this one and there is a strainer over the drain.