How do you adjust the throttle cable on an outboard?
Step 1 Loosen the throttle cable adjuster jam-nut with the wrenches. Push the control lever forward to the “Forward idle” position. Pull the control lever back, through neutral, into the reverse idle position. Push the throttle to the “Full forward” position. Adjust the gearbox control cable. Push the control to the “Forward idle” position.
How do you adjust the throttle on a motorcycle?
Once the decelerator cable has been set, the accelerator cable is adjusted. The accelerator cable tension is usually set so that 2-3mm of free play is present in the throttle grip. Once the correct tension has been applied, the lock nuts should be snugged and any dust covers should be slid back over the adjusters.
Where are the adjusters on the throttle cable?
There are usually inline barrel adjusters (sometimes one on both the opening and closing cable, but often only on the opening cable) and adjusters down at the carbs or throttle bodies. Ther barrel adjusters on the cables are for fine-tuning the free play, while the adjusters down by the engine are for making larger adjustments.
Where is the throttle cable in a car?
Position the application throttle control in the fast throttle position. Then move the throttle control back 3/16″ (4.75 mm). Insert the control cable bowden wire in the proper hole of the engine control lever, which is located on the side of the carburetor air intake elbow.
How do you adjust the throttle on a Harley Davidson?
Proper method to throttle adjustment: 1.) Loosen and put slack in both the throttle (pull) and Idle (return) cables. 2.) Turn your handlebars straight while adjusting the throttle cable, and to the left, while adjusting the idle cable. 3.)
What happens if you loosen the throttle cable?
If you overtighten it it can “stick” or lock in whatever position you put it in. THis mean is you downshift and “blip” the throttle it will stay wide open. If you turn like this you will go down. Make sure your throttle doesn’t stick. If it does loosen that cable for sure!
How to check throttle grip free play [ a ]?
Throttle Control System Inspection •Check the throttle grip free play [A]. below). in all steering positions by the return spring. cable routing, grip free play, and cable damage. Then lubricate the throttle cable. •Run the engine at the idle speed, and turn the handlebar doesn’t change. and the cable routing. view). there is no play.