How do you adjust a Harley Davidson pushrod?
Bring Cam to Base circle for the tappets you wish to adjust. Rotate the engine. Watch the intake valve open (pushrod goes up) and then close (pushrod goes down). Continue rotating slowly until the cylinder’s piston reaches top dead center (TDC).
How do you remove adjustable pushrods?
I screw the threaded portion up all the way into the pushrod. You have to keep threading the cup down while doing this. eventually you will have enough of the threaded rod up in the main rod, the cup will simply fall off. Once the cup is off, screw the rod the rest of the way you can.
Can you use adjustable pushrods on a Harley?
In addition, you’ll receive sixteen video downloads, access to GOLD member LIVE events, and so much more! Learn how to remove the Harley cam cover and cam lifters. We remove the lifter blocks and Harley lifters in this procedure to give you a better view. We cut the pushrods and will use adjustable pushrods during reassembly.
What to remove from the top of a Harley Davidson?
You will start by removing the battery negative cable, fuel tank, and exhaust. Remove the top motor mount; including the horn assembly. In the same area; remove the fuel line and the engine temp sensor.
How do you remove head gaskets on a Harley Davidson?
You are now stripped down to the heads. You will need a 1/2″ 12 point socket to loosen your head bolts. Break them free with one sharp motion; then continue to loosen evenly in a cross pattern. Lift off your heads and remove the old head gaskets.
How to do a Harley top end overhaul?
Harley top end overhaul is a lengthy procedure on your Twin Cam motor. Follow Mike’s instructions and refer to your service manual. You will see that a lengthy job does not necessarily make it a difficult job. By taking your time, focusing, working clean and orderly, you will find yourself moving right through this detailed repair or upgrade.
In addition, you’ll receive sixteen video downloads, access to GOLD member LIVE events, and so much more! Learn how to remove the Harley cam cover and cam lifters. We remove the lifter blocks and Harley lifters in this procedure to give you a better view. We cut the pushrods and will use adjustable pushrods during reassembly.
How do you close the modal on a Harley Davidson?
This modal can be closed by pressing the Escape key or activating the close button. This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. This is a modal window. Sign up for premium membership and get access to our best Harley repair videos and step-by-step instructional projects.
How do you remove a front rocker cover?
The front is still a pain on the left side but not as bad as the rear rocker box. After you get the 4 allen heads out just carefully slide the top 2 pieces of the box out and you are free to un-bolt the bottom piece from the head. Cut the stock push rods with bolt cutters then use an adjustable push rod like revera taperlites.