How do I use my Linksys WRT54G as a repeater?

How do I use my Linksys WRT54G as a repeater?

Linksys Wireless-G Router (WRT54G)…Configuring an Access Point as a wireless repeater

1. Access the router’s web-based setup page.
2. When the router’s web-based setup page opens, click Status then click Wireless.
3. Take note of the MAC Address.
4. Connect a computer to the access point.
5. Assign a static IP address on the computer.

How do I setup my Linksys WRT54GS router?

How to Set Up a Linksys WRT54G Wireless G Router

1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
2. Step 2: Connect Your Computers.
3. Step 3: Connect the Power.
4. Step 1: Log In.
5. Step 2: Open Wireless Settings.
6. Step 3: Name the Network.
7. Step 4: Set Up Security.

How do I change my wireless router to bridge mode?

Bridge Mode is only supported for VDSL and Fibre connections.

1. Connect your laptop or computer to one of the LAN ports on the gateway router using an ethernet cable.
2. Type your username and password to sign in.
3. Go to Internet settings.
4. Edit the settings and select the Connection type as Bridged.
5. Click Save.

How do I make my Linksys wrt54g a wireless access point?

1. Plug your laptop or computer directly to the WRT54GS using an Ethernet cable.
2. Log in to the WRT54GS management interface by opening a Web browser and typing “192.168.
3. Click on the “Setup” tab and give the WRT54GS an IP address within the same subnet as your first wireless access point.

How do I access my Linksys WRT54GS router?

Unplug the router for a few seconds and then plug it back in. Wait 60 seconds to give the router time to boot up. Now that it’s been reset, connect your computer to the router using a network cable. Open a web browser and enter http://192.168.1.1/ as the URL, and admin as the password.

How do I log into my Linksys WRT54GS?

What default IP Address, username and password are used to log in to the router’s web-based setup page? The default IP Address is 192.168. 1.1. On the log in window, leave the username blank and the password is “admin”.

How do I setup a Linksys router at home?

1. On the web-based setup page, click the Wireless tab.
2. Select Manual for the Configuration View.
3. Select Mixed on the Network Mode drop-down list.
4. Enter your desired Network Name (SSID) in the field provided.
5. Select Auto (20MHz or 40MHz) from the Channel Width drop-down list.
6. Select a Channel from the drop-down list.

What is default password for Linksys WRT54GL routers?

For all versions of the Linksys WRT54G router, the default password is admin. The password is case sensitive, so it must be written exactly like that. The default IP address is 192.168.1.1.

Is the Linksys WRT54G obsolete?

This Linksys WRT54G was one of the best pieces of computer hardware of its day. But depending what you ask of it today, it can feel obsolete . Remember, when the Linksys WRT54G came out way back in 2002, it was pretty unusual for a household to have much more than a desktop and a laptop, and not all game consoles had network adapters standard.

What do the lights on Cisco Linksys router mean?

If the Power or Diag LED (Light Emitting Diode) on your Linksys router is blinking, it means the firmware is corrupted . If this happens, you won’t be able to do the following: Access the router’s web-based setup page; Assign IP Addresses to computers connected to your router using its DHCP capabilities

What does a Linksys wireless router do?

Linksys Routers are well known for providing support for WPS security standard as they are used to handle wireless connections. Almost every model of Linksys Router comes with a WPS button.