How do I reset my Canon PowerShot sd1300?
Try removing the batteries from the camera and letting the camera sit without batteries for a few minutes. Then, install fresh batteries and power the camera on. If you still receive the same error message, the camera is going to require service.
How do I reset my Canon PowerShot?
Restart your camera.
- Set the camera’s power switch to and remove the batteries.
- Open the Memory card slot cover to make sure the SD memory card is securely set in the card slot.
- Insert the batteries and turn the power switch .
- Set the camera’s power switch to and remove the batteries.
What does it mean when your camera says lens error?
A mechanical impact to the lens unit caused by shock, pressure or blocking the lens movement can result in damage to its mechanical parts. This can cause further damage to the integrated motors or drives. Turn the camera off and then on again. …
How do I reset my Canon Powershot?
Why does my camera say lens obstruction?
The FZ43 lens is probably jammed or some foreign object(s), dust, dirt, etc., is preventing the lens from functioning properly. Simply power the FZ43 off and restart it to reset the lens. Be sure to check for any particles or other foreign objects around the edges of the lens and carefully clean with a soft, dry cloth.
What causes a lens error on Canon PowerShot?
11 Lens errors are fairly common. Usually it’s sand or grit interfering with the lens extension mechanism. Or the camera’s been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension.
What should I do if my Canon camera stops working?
Hairdryer all over camera not too hot and not too much power. Next magazine paper between lens and camera body all around. Leave camera upside down lens facing down on flat surface overnight with all batteries and memory out. Also tapped the lens carefully a few times. In the morning surprise surprise bingo the camera works again.
When does a Canon camera go out of warranty?
The age of your camera and/or the cause of the error will determine your service options. If the camera is more than one year old, or if the camera was damaged by liquid, sand, or applied pressure or force, it is out of warranty.
What happens to my Canon camera if I decline an estimate?
If you decline the estimate, the camera will be shipped back to you unrepaired. When the repairs are complete, the camera will be shipped back to you via Federal Express or UPS. The length of time for the repair will be dependent upon the nature of the repair and availability of parts, if needed.