How do I make my Dell R710 quieter?

How do I make my Dell R710 quieter?

Below are some ways that I seriously considered in order to bring the noise levels down.

  1. Move the rack somewhere else.
  2. Replace the stock fans with quieter ones.
  3. Apply noise deadening material around the rack.
  4. Make the stock fans spin slower.
  5. Overview.
  6. iDRAC Considerations.
  7. Guest Virtual Machine Configuration.

How do you make a Dell PowerEdge quieter?

The Fix: Replacing the PowerEdge Fans

  1. Move up to 150 cubic feet of air per minute.
  2. Spin at up to 6,000 RPM.
  3. Scream at 57 decibels – not quite as loud as yo momma, but close.
  4. Have pulse width modulation (PWM) speed control – the motherboard can control the fan speed based on how hot the server gets.

How do I make my server less noisy?

Is There Anything That Can Be Done to Decrease the Sound of My Server?

  1. Make sure the server is in a place with good airflow and temperature.
  2. Make sure you are running the latest & greatest firmware and update if you aren’t.
  3. You can adjust the default parameters of the fan speed on your server.

How do you adjust the fan threshold on a Dell Poweredge?

The Fan Speed Setting menu is found in the iDrac menu. During BIOS boot, F2 -> IDRAC settings -> Thermal -> Fan Speed Offset. The Fan Speed setting menu allows the user to select Low Fan Speed Offset and High Fan Speed Offset.

Why is my server so loud?

If the noise is really a concern, try cleaning and oiling the fans, or replacing the old ones in there with new ones. Airflow restrictions could also be causing sub-optimal cooling and requiring higher fan speeds, as could an increase in ambient temperatures, or increased air temp near the fan intakes.

How do I control the fan speed on my Dell?

What does offset mean in fans?

Fan speed offset is dynamic and based on the system. The fan speed offset increases all fan speeds by the same percentage.

How do I reduce server noise?

Best Ways to Soundproof the Server Rack

  1. Clean your cooling fans. The problem with fans is the fact that they tend to collect a lot of dust if they are not cleaned regularly.
  2. Reduce the speed of the fans.
  3. Buy quieter fans.
  4. Buy a quality soundproof server rack.
  5. Buy a new Quiet server.

How noisy is a server?

2 Answers. 1U servers are always noisy. If it sounds like a small jet engine in there, that’s because it kind of is. The fans in a 1U server are so small that they need to spin at ~10,000 RPM to move enough air to cool the server when it’s under full load.

Which is louder Dell 2950 or Dell R710?

Hand down, though, the R710 has more capacity and produces way less noise than the 2950 but do be warned that if you get the ambient temperature of the system board up to 86-87 degF (30-31 degC) the fans will ramp up to about 8,000 RPM and it’s about as loud as a Dell 2950.

Is the Dell R710 series of servers quiet?

From what I’ve read in the reviews and in Dell’s own technical literature, the R710 series of servers are supposed to be relatively quiet (39 LpA,dBA for configuration with 2 “stressed” processors is quoted in Dell’s technical guidebook ( http://www.dell.com/downloads/global/products/pedge/en/server-poweredge-r710-tech-guidebook.pdf, pg 18).

How much does a Dell R710 laptop cost?

Cruising eBay shows a bunch of R710’s (with modest specifications) for $320 – $380 “Buy It Now” with more deals on auctions. With that said, anyone who has a 2950 or 1950 will attest that they’re pretty noisy and most certainly cannot be kept in a hall closet some place.

https://www.youtube.com/watch?v=z-KoR7hOOng

Posted In Q&A