How do I fix my GM code p1345?
Loose the distributor hold down bolt with engine OFF. Make sure your OBD scanner is plugged in to monitor the Cam Retard Offset reading. Turn the engine on, let it warm to normal operating temps, and get the rpm’s above 1,000. If your reading is negative, turn the distributor counterclockwise.
What causes a GMC Envoy to throw p0014?
When the camshaft timing will not return to a less aggressive profile after heavy engine load, P0014 will be thrown. P0014 affects bank 1, which is on the side of the engine where cylinder one occurs in the firing order. Typically, P0014 will cause quite a few noticeable symptoms in the GMC Envoy. They include (but are not limited to):
What does trouble code p0014 mean on a car?
The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be.
Where is Bank 1 on a GMC Envoy?
P0014 affects bank 1, which is on the side of the engine where cylinder one occurs in the firing order. Typically, P0014 will cause quite a few noticeable symptoms in the GMC Envoy. They include (but are not limited to):
Why does the Chevy Captiva p0014 throw the cam?
This is because the camshaft actuators use hydraulic energy to move. VVT uses camshaft actuators to adjust the position of the cam. When the camshaft timing will not return to a less aggressive profile after heavy engine load, P0014 will be thrown.
When the camshaft timing will not return to a less aggressive profile after heavy engine load, P0014 will be thrown. P0014 affects bank 1, which is on the side of the engine where cylinder one occurs in the firing order. Typically, P0014 will cause quite a few noticeable symptoms in the GMC Envoy. They include (but are not limited to):
What causes the engine code on a Chevy p1345?
On the 5.7 Vortec however, engine timing can require manually adjustment when it gets out of spec, and poor timing is the main cause of the P1345 engine code. What Causes the P1345 Engine Code?
How much does it cost to diagnose p1345 GMC code?
What does this mean? The cost of diagnosing the P1345 GMC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P1345 GMC code detected?
What does p0014 mean on a VVT engine?
VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor. P0014 means that the camshaft position is too far advanced from where it should be in relation to normal operating specs. Below, you’ll find some typical issues that cause P0014.