How do I configure my Aruba access point?

How do I configure my Aruba access point?

Configuring Access Point (AP) settings

1. Click Configuration, Wireless.
2. Select a group and then click Access Points.
3. Click the AP that user want to customize.
4. Click Edit.
5. Configure the parameters described in table below as required and then click Save Settings.
6. Click Save Settings and reboot the AP.

How do I setup a device in Aruba?

1. Connect the power cable to the power supply.
2. Connect the power cable to the Aruba AP and plug the power into power.
3. Connect the provided network cable to the black E0/PT connection on the bottom of the Aruba AP.
4. Connect the other end of the network cable into an open port on your wireless router.

How does Aruba AP communicate with controller?

Each AP requires a unique IP address on a subnetwork that has connectivity to a controller. Aruba recommends using the Dynamic Host Configuration Protocol (DHCP) to provide IP addresses for APs; the DHCP server can be an existing network server or an controller configured as a DHCP server.

Do Aruba APs need a controller?

What is Aruba Instant? Aruba Instant is a wireless access point operating system and platform that does not require the purchase of hardware/virtual controllers for deployment.

How do I find my Aruba access point model?

To view the Access Point Details page, follow these steps: Tap the Inventory( ) tile on the Aruba Instant On home page or tap the Site Health( ) banner and then tap Show inventory. Tap any of the APs listed in the Inventory list.

What is the default IP address of Aruba access point?

The default IP address of the controller is 172.16. 0.254.

How does an Aruba device work?

Just plug in the wireless access points, set them up with a mobile app or a web browser, and you’re off and running in minutes. Behind the scenes, the Aruba Instant On cloud delivers highly available business-grade Wi-Fi and services.

How do I add Aruba control to Aruba controller?

To add an Instant AP to the network:

1. Navigate to the Configuration > Access Points page.
2. Click + in the Access Points table.
3. In the New Access Point window, enter the MAC. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address for the new Instant AP.
4. Click OK.

How do I find my AP name?

Press Windows-Key+R to bring up a Run prompt. Then enter “cmd” and press enter. Then type in “netsh wlan show interfaces”. This will display the wireless network the client is currently associated with and information about it.

Is there a default configuration profile for Aruba?

ArubaOS also contains a predefined “default” profile for each profile type. You can use the predefined settings in these default profiles, or create entirely new profiles that you can edit as required. Each different AP configuration profile type can be managed using the CLI or the WebUI.

How does the Aruba AP support LLDP protocol?

Wired interfaces on Aruba APs support LLDP by periodically transmitting LLDP Protocol Data Units (PDUs) comprised of selected type-length-value (TLV) elements. The AP LLDP profile identifies which TLVs will be sent by the AP. For details, see Understanding Extended Voice and Video Features.

What do you mean by configuration profile in AP?

Understanding AP Configuration Profiles. An AP configuration profile is a general name to describe any of the different groups of settings that can defined, saved, and applied to an Access Point. ArubaOS has many different types of profiles that each allow you to configure a different aspect of an AP’s overall configuration.

How are AP profiles used in wireless LAN?

The Wireless LAN collection of profiles configure WLANs in the form of virtual AP profiles. A virtual AP profile contains an SSID profile which defines the WLAN, the high-throughput SSID profile, and an AAA profile that defines the authentication for the WLAN.