Does Mercedes use Torx?
Instead of using hexagonal bolt head, Mercedes-Benz uses female Torx star head for optimum torque transfer. Whether they used them because the E-Torx bolt heads look sophisticated or to deter you from fixing your car, we don’t know.
What kind of screws does Mercedes use?
Depends on what your doing, but t30 is used extensively throughout the engine bay. T20 and t40 can be found on interior and body components. MB also likes to use inverted torx bolts a lot. E8, E10, and E12 are the most common.
Is Star same as Torx?
Torx (pronounced /tɔːrks/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 by Camcar Textron. A popular generic name for the drive is star, as in star screwdriver or star bits. Torx screws are also becoming increasingly popular in construction industries.
What size screws Mercedes license plate?
You need metric screws M6 1.0 (1.0 is the thread type). Default length is 16mm but you need 10mm if you wish to mount your rear license plate without a license frame otherwise the longer length will drill marks into the rear lid and with a gap between the plate and the screws.
Do you need a Torx socket for a Mercedes idler pulley?
This is common on M112 and M113 engines from 1997 to 2007. Newer Mercedes-Benz idler pulleys (on M272 and M273 and newer models) require a Female Torx socket. Always verify by inspecting the bolt on the center of your idler pulley. Park your Mercedes-Benz in an area where you can work.
Why do Mercedes Benz use female Torx bolt heads?
This tool makes removing the oil filter easier than it is to make a bowl of cereal in the morning. Instead of using hexagonal bolt head, Mercedes-Benz uses female Torx star head for optimum torque transfer. Whether they used them because the E-Torx bolt heads look sophisticated or to deter you from fixing your car, we don’t know.
What kind of wrench do I need to repair my Mercedes?
You will surely know when they fail. Instead of paying several hundred dollars to have an auto repair shop replace the engine mounts, you can do it yourself in a few hours. This repair requires that you have a 16 MM Engine Mount Offset Wrench. Without this tool, don’t even bother to try replacing the engine mounts.
What kind of socket do you need for Mercedes Benz?
You will find that many bolts on your Mercedes-Benz will require you use Female E Torx Star Socket Set. Mercedes-Benz cars are now equipped with at least 20 control units.
This tool makes removing the oil filter easier than it is to make a bowl of cereal in the morning. Instead of using hexagonal bolt head, Mercedes-Benz uses female Torx star head for optimum torque transfer. Whether they used them because the E-Torx bolt heads look sophisticated or to deter you from fixing your car, we don’t know.
You will surely know when they fail. Instead of paying several hundred dollars to have an auto repair shop replace the engine mounts, you can do it yourself in a few hours. This repair requires that you have a 16 MM Engine Mount Offset Wrench. Without this tool, don’t even bother to try replacing the engine mounts.
How big is a Mercedes Benz your & are tool?
For R&R of the grooved nut on the rear axle shaft flange, or when replacing axle bearing and seal. W107, W114, W115, W116, W123, W126. With size outside diameter 55mm, inside diameter 49mm, tab width 8mm, diameter of inner tube 27mm.
What should I replace my ML350 AC compressor with?
Since the root cause of the AC failure was the radiator suction fan, and the 11 year old ML350 had 163,000 on the clock, decided to replace this component as well. Not found on PartsGeek, or PelicanParts; so looked on FCPEuro and OEM Parts.com. OEM was definitely less expensive than FCP, but still spendy at $468.