Can you drive a MBE 4000 Mercedes engine?

I have driven a Mercedes MBE 4000 for 3 years. DO NOT buy a Mercedes engine. We lease four of them where I drive, and all have had at least 2 turbos, injectors at least twice on one, and once on the others, head gaskets on all 4, electrical problems causing reduced power.

What kind of engine does a Mercedes 4000 have?

MBE 4000 Mercedes engines. Discussion in ‘ Questions From New Drivers ‘ started by farmbig_01, Aug 8, 2007 . Anyone have any experience with the MBE 4000 Mercedes engines? Im looking at buying another truck, Freightliner Columbia, with this engine and have not really heard much about them.

Is it safe to buy a Mercedes engine?

DO NOT buy a Mercedes engine. We lease four of them where I drive, and all have had at least 2 turbos, injectors at least twice on one, and once on the others, head gaskets on all 4, electrical problems causing reduced power. Also, idler pulleys go out regularly, water pumps are a concern.

How many Mercedes engines are there in trucks?

To make a long story short, the fuel savings will soon evaporate into repair bills and down time. The company we lease from has several hundred Mercedes powered Freightliners and Sterlings, they are trying to sell all of them, and some have never even been put into service.

How many horsepower does a Freightliner MBE 4000 have?

Print page. LOUISVILLE, Ky. – Freightliner has unveiled a proprietary heavy-duty engine line in the MBE 4000, flexing the muscle of its parent that is Daimler Chrysler. The 12.8-litre in-line, six-cylinder Mercedes Benz engine family offers seven power ratings ranging from 350 to 450 hp, with torque rated at between 1,350 and 1,550 lb-ft.

What’s the peak torque of the MBE 4000 engine?

Regardless of which of the seven power ratings you choose, the MBE4000 is characterized by reaching 90 percent of its peak torque at 1000 rpm. The less required maintenance on the engine, the more time your truck is on the road. That’s why the MBE4000 diesel engine was designed for maximum reliability.

How to bleed diesel fuel system on Mercedes MBE 900?

http://schoolbusmechanic.blogspot.com Bleeding diesel fuel system on a Mercedes MBE 900 diesel engine using a Kent Moore J-47912 diesel fuel system bleeding tool. Bleeding diesel engines is much easier when you have the right tools. The main purpose of pressurizing the fuel system is to bleed diesel fuel lines which gets rid of all the trapped air.

How to check fuel pressure in MBE 4000?

If operating an engine in an enclosed area, vent the exhaust to the outside. Do not modify or tamper with the exhaust system or emission control system. Start the engine and warm it up to working temperatures: 80°-95°C (176°-203°F). Check the fuel pressure at two points: idle speed and rated speed.

What’s the most common problem with the MBE 4000?

The most common problem I see with the MBE 4000 are coolant leaks, and fuel leaks. Coolant usually leaks on the coolant rail, it is a metal rail that connects all 6 cylinder heads together, it is all so called the Deareation line. They usually crack, or the crush washers leak.

How to remove brake spring from MBE 4000?

From the top of the cylinder head, fit the spring and spring retainer, as marked on removal, onto the valve stem. Push the spring down with the CTV spring remover and insert the collets into the spring retainer.

How to replace constant throttle on MBE 4000?

From the bottom of the cylinder head, draw out the valve and spacer. For ease of installation, mark the valve with a paint pen. Using a small hook, remove and discard the valve stem seal. Note: Always replace the valve stem seal whenever the constant-throttle valve is removed.

What kind of engine does a Freightliner have?

Discussion in ‘ Questions From New Drivers ‘ started by farmbig_01, Aug 8, 2007 . Anyone have any experience with the MBE 4000 Mercedes engines? Im looking at buying another truck, Freightliner Columbia, with this engine and have not really heard much about them. I have heard they are the lightest engine and will get 6+ mpg.

Do you need 13 speed on a Freightliner Columbia?

A 13 speed is a requirement with them IMHO, to give it the gearing it wants to stay in the power. Heads are individual, making a HG job a doddle. I had all 6 replaced last year when 1 started weeping coolant, along with new nozzles.

What should I do about my Mercedes om-460?

First thing to do, is replace the injector nozzles in the heads. Cheap part that can cost an engine rebuild. Yes they can be rebuilt without issue. Try to get the turbo brake instead of the exhaust brake, works a LOT better. Head gaskets should have been done under warranty, as well as most other weakness’ they had.

What are the specs of a 2005 Freightliner?

2005 Freightliner Century 120 Detroit 12.7L 380 hp, block heater, 10 speed manual, air ride cab & suspension, LP 22.5 tires on steel rim, quarter fend… 2005 FREIGHTLINER, BUSINESS CLASS M2 106, Heavy Duty Trucks – Flatbed Trucks, , , Let us build a custom truck to your specs!

Can a MBE 4000 cylinder head be repaired?

Critical areas of the MBE 4000 block can now be repaired instead of replacing the entire block; cylinder blocks should be repaired using the defined procedures and listed products whenever possible. Refer to this guide when doing block-to-cylinder head joint repairs.

What should I know about Detroit Diesel MBE 4000?

J1587 and J1939 datalinks, where it can be read by minidiag2, Nexiq™ ® Diagnostic Data Reader (DDR), or Detroit Diesel Diagnostic Link (DDDL) PC software. The DDEC-ECU monitors both the engine and the datalink. When a malfunction or other problem is detected, the system selects an appropriate response;…

Where is the EGR shutoff valve on the MBE 4000?

Page 27 EGR modulated control valve and the mixer and then back to the cylinder. EGR Control Valves There are two EGR valves on the MBE 4000 EGR engine — the EGR shutoff valve and the EGR modulated control valve. The EGR shutoff valve is a pneumatically driven butterfly valve, located at the inlet of the EGR cooler.

Is the ecu128 code the ABS or the engine?

They are not fault codes, they are module identifiers. ECU128 is the engine ECU, ABS136 is the ABS. You should be able to toggle to another screen to give SID/PID and FMI #’s. Without that, I all can tell you is that you have an engine and an ABS fault.

How does the MBE 4000 work in Detroit?

MBE 4000: Detroit Leverages Daimler Engines 1 High torque at low RPM means excellent acceleration, outstanding gradeability, reduced shifting 2 A high-output turbocharger perfectly matched to high-pressure injectors for excellent drivability 3 Outstanding fuel economy and low emissions without the need for aftertreatment devices

What kind of connector do I need for MBE 900 engine?

MCM 120–pin Connector for MBE 900 Engines The pinouts for the 120–pin connector for the MBE 900 engine are listed in Table 3-5, Table 3-6, Table 3-7, and listed in Table 3-8. Pin Signal Type Function Connector

Why did my Mercedes Benz engine go down?

When mine went it was 8 weeks down because the leasing company had 5 other Mercedes down at the same time with bad head gaskets, and Detroit was 3 weeks behind in repairing all the ones coming to them from other companies. To make a long story short, the fuel savings will soon evaporate into repair bills and down time.

How to remove intake manifold from MBE 4000?

Remove both engine trim covers. Remove the cylinder head cover for each cylinder head. Remove the intake manifold.

What kind of equipment does the MBE 4000 have?

But the really interesting element of the MBE 4000 is its retarding capability. Standard equipment on an MBE 4000 engine includes a constant-throttle-valve compression brake and an exhaust brake. The constant throttle valve is a

Where is the exhaust brake on the MBE 4000?

Unlike the Jacobs compression brake, the MBE 4000 does not use the exhaust valves – just the constant throttle valve. The exhaust brake is a flap valve located in the exhaust pipe immediately downstream of the turbo outlet. When closed, it creates backpressure in the engine, contributing to the braking effort.

When was the MBE 4000 engine consent decree?

According to the so-called ‘consent decree’ in 1998, domestic engine makers reluctantly agreed to push the ’04 emissions requirements ahead 14 months.

What kind of brakes does a Detroit Diesel MBE 4000 have?

The MBE 4000 comes with a standard engine brake that provides up to 370 braking horsepower. A premium engine brake option is available with up to 580 braking horsepower. The MBE 4000, with the best power-to-weight ratio in its class is ideal for many vocational applications, such as regional distribution, vocational and bulk hauling.

What’s the difference between MBE 900 and MBE 4000?

The DDEC VI offers increased microprocessor power and enhanced diagnostics. Both engines will feature similar Aftertreatment technology to meet 2007 emissions standards. The MBE 900 and MBE 4000 will use optimized EGR to treat NOx and an Aftertreatment System to reduce particulate matter emissions.

What kind of truck is a sterling dump truck?

2008 STERLING, ACTERRA, Heavy Duty Trucks – Dump Trucks, Cummins ISC 8.3, Manual, 14′ DUMP BED WITH DUAL FOLD DOWN SIDES ON BOTH SIDES, SWING OPEN TAI… 2005 Sterling L9500 Single Axle Day Cab, Mercedes Benz OM-460, Allison 5 Speed Automatic Transmission, 450 HP, Engine Brake, 49,762 ECM Verified Miles…

What kind of truck is a 2000 Sterling?

2000 STERLING, ACTERRA 7500, Heavy Duty Trucks – Conventional Day Cab Trucks, Caterpillar 3126, Manual, 2000 Sterling Acterra 7500 Single-Axle Non-Sle… 2008 STERLING, LT9513, Heavy Duty Trucks – Garbage Trucks – Roll-Off, Mercedes MBE4000, Automatic, 2008 Sterling A9513 Tandem-Axle Roll-Off Refuse Tru…

Navigation