Can spark plug wires cause a car not to start?
Yes, it can. If the spark plugs are bad and not firing the spark as they should the fuel/oxygen mix can be very hard to get to ignite. So the answer to your question is yes bad spark plugs can make a car not start.
Why are my spark plugs not firing?
The most common cause for a misfire is a problem related to the ignition system. Misfiring can be caused by loss of spark; imbalanced air/fuel mixture; or loss of compression. This includes worn, fouled or damaged spark plugs, bad plug wires or a cracked distributor cap.
What should I do if my spark plug isn’t working?
It shouldn’t be a coincidental problem from another system like the fuel injection or air intake. Pull the #1 spark plug out and hold the threaded part to a grounded piece of the engine and have a friend try to start the engine, check to see if it has spark.
What should I do if my engine won’t start?
You should see a bright spark jumping the gap in the spark tester. If you don’t see a spark, repeat the test. This time, adjust the spark tester to 30KV. If you still don’t see a spark, repeat the test and set the tester to 10KV. If this time you see a spark or no spark, you have a problem with the ignition system.
Can a car still start after removing plugs?
– After removing one plug wire and then putting it back on to inspect the plug well before changing the plugs, the car was able to start once, but after that it didn’t start or if it did, it wasn’t firing on all 4 cylinders. Nothing was done to it between when it could still start and when it failed.
How often does a spark plug need to be ground?
If you remove the distributor, remove the coil wire from the cap and connect a spark plug to it, ground the distributor and with the key on spin the drive gear you should see the plug spark 4 times per rotation of the shaft. If there’s no spark check all the wiring and ohm out that new pickup coil.