Are there any recalls on a 2011 Dodge Nitro?
2011 Dodge Nitro Recalls. There have been 3 safety recalls issued from NHTSA. Summary: Chrysler (FCA US LLC) is recalling certain 2008-2010 Chrysler Town and Country and Dodge Grand Caravan and 2007-2011 Dodge Nitro vehicles. Chrysler’s number for this recall is W09.
How do you reset a 2011 Dodge Nitro?
This will reset the computer also….If you want to reset your truck.
- Turn on the key and eluminate all the warning lights (Do not start).
- Depress accelerator three times to the floor quickly.
- Turn off the power (pause).
- Start truck normally.
- Drive it like you stole it.
How do I reset my Dodge Nitro?
How To Reset Dodge Nitro Change Oil Minder Message Light (2007-2012)
- Stop the vehicle and turn the ignition switch to the RUN position without starting the engine.
- Fully depress the GAS PEDAL slowly three times within 10 seconds.
- Turn the ignition off and start the engine to verify the indicator has been reset.
How do you check the transmission fluid in a 2011 Dodge Nitro?
To check the levels of the nitro tranny you need to bring it to temperature and shift it into drive and reverse a couple times. Then you are supposed to cross reference a graph and level on a special dipstick.
What kind of transmission fluid does a 2011 Dodge Nitro take?
For 2011 Nitro First generation Dodge recommends to use: ATF+4 automatic transmission fluids.
What is TIPM on Dodge Nitro?
TIPM, which stands for “Totally Integrated Power Module” is the Chrysler nomenclature for the fuse and relay box, or electronic power relay center, in Chrysler vehicles produced since the early-to-mid-2000’s. Fuses – are actually designed with one purpose in life: To fail.
How do you reset the electronic throttle control on a Dodge Nitro?
Hold the accelerator to the floor for at least 15 seconds. Then turn the ignition switch “off” and wait at least 10 seconds. You then can turn the ignition switch back to “on” and wait 2 seconds. If this does not work You can use the OBDII diagnostic tool to help reset the electronic throttle.
How do you reset a 2008 Dodge Nitro?
Reset oil change light on a 2008 dodge nitro
- Turn the ignition key to ON but do not start the engine.
- Slowly depress the accelerator to the floor and release it three times within 10 seconds.
- Turn the ignition key to the OFF position. Related Posts.
Why does my Dodge Nitro have no start?
The anti-theft system may cause a no start condition due to electrostatic discharge (ESD) affecting the wireless control module (WCM). There is an updated WCM to correct this issue. The average cost for a Dodge Nitro No Start Diagnosis is between $88 -$111.
What to do if your Dodge Nitro heater is not working?
If your Nitro has a built in temperature gauge, take a look at it and see if it is in the spot it is normally in after a bit of driving. If it looks like it is colder than normal, that’s a pretty good indication that there is something wrong with the thermostat.
Why does my car not start in cold weather?
When I had this problem I pushed it back in and my car started. Nitro starts as long as it’s cool or cold weather as soon as the weather warms up there’s a problem with it starting. Having 5 to 10 minutes for it to start, it doesn’t always happen.
Why does my Dodge Avenger engine not start?
The anti-theft system may cause a no start condition due to electrostatic discharge (ESD) affecting the wireless control module (WCM). There is an updated WCM to correct this issue.