Why is my radio on but no sound from the trunk?
Both radios come on, and can change screens, and the back up camera works too. This is a VAN, so there isn’t any amp in the trunk. No sound in any of the speakers. The connections to the car wiring are good, and even blew out the connections with compressed air to ensure a clean seating with the wiring.
How to troubleshoot AM or FM radio reception issues?
Follow these steps to troubleshoot AM or FM radio reception issues. IMPORTANT: If model-specific information is required, refer to the operating instructions supplied with the product. Manuals are posted on your model support page. Ensure the appropriate AM or FM band is selected.
What to do when your car radio goes blank?
Last week its radio display went blank. Everything still works — the buttons light up below the display — but there are no station numbers or CD track indicator lighting up. It’s completely dark. The dealership service manager said, “It happens.” He wants $1200 and some change to fix it; he says the whole radio/CD unit has to be replaced.
What kind of firmware do I need for my MOTOTRBO radio?
All MOTOTRBO radios and repeaters working in the radio system must use the same firmware version. The required firmware version for DP/DM 3000 is “R01.08.32” or higher; The required firmware version for DP/ DM 4000 and SL radios is «R02.00.00» and higher. Note.
How to troubleshoot poor or no AM or FM radio reception on your car?
How to troubleshoot poor or no AM or FM radio reception on the car stereo. IMPORTANT: It is recommended that all car stereo installations be performed by a qualified, professional installer. NOTE: If model-specific information is needed to complete any of these steps, refer to the instructions supplied with the product.
How can I get my Car Stereo to remember my settings?
You need to find a 12v wire in the car that always has power going to it and hook it up to the yellow one. If you can’t find one, just tap into a fuse in the fuse box. Right now, the wire you have hooked up to the yellow power wire of the headunit cuts power whenever you turn the car off.
Why does my Kenwood car stereo not remember settings?
Hi i have a kenwood car stereo (KDC- W7031) in a P reg VW Polo. But it will not remember any of the settings i put in. Like radio stations, display settings and EQ settings. which is a bit of a pain. don’t know if it’s a case of me wiring it up wrong or whatever but could you advise me on where i might be going wrong or what i could do/need to fix?
What to do if your car stereo won’t turn on?
If you can’t find one, just tap into a fuse in the fuse box. Right now, the wire you have hooked up to the yellow power wire of the headunit cuts power whenever you turn the car off. Hope that helps 😉
What to do when your radio doesn’t work?
Radio/stereo doesn’t work! Radio/stereo doesn’t work! I have a Sundance 880 series spa and shortly after a cold snap this winter my radio/stereo stopped working. All the lights are ‘off’ on it. 2. using a rod to press the reset button under the AUX cover. Nothing worked!
Why does my Sub Woofer on my stereo not work?
Will, check the wire and wiring harness from the stereo deck to the sub woofer. If your deck and speakers are working then you should have power to the sub. If there is a break in the wire or wiring harness or moisture in the harness this could keep it from working. If the wire and wiring harness is ok then you have a bad sub woofer.
Why does my speakers on my deck not work?
If your deck and speakers are working then you should have power to the sub. If there is a break in the wire or wiring harness or moisture in the harness this could keep it from working. If the wire and wiring harness is ok then you have a bad sub woofer. Check for proper voltage with a multi-meter on the harness coming from the deck.
Why does the radio work but no sound?
The radio seems to work, I can pick stations etc, turn volume up and down, but there is never any sound that comes out of the speakers Any ideas what could be wrong? maybe an amplifier fuse somewhere? I looked at the mirror/audio and woofer fuses under the dash, they are both good Is this the BOSE version or Standard?
What to do when your car radio has no sound?
Usually when this happens though the radio will lose all power and you won’t have sound at all. Verify your fuses behind the radio, and in the vehicles fuse panels as well. Replace any blown fuses and see if the radio kicks on and produces sound. If you have power to the radio officially but yet you still have no sound, then continue on.
Why is my Radio not working on my Harley Davidson?
Turn the power on radio off and on and it will work everytime. Ten minutes later it will do the same thing. Bumps in the road seem to have no barring on the problem. It also will do the same thing with a cd in it. HELP Check the faceplate and see if the headset icon is activating when you loose your audio. Any amps in the system?
Why is the radio not working on my Ram truck?
Held both volume and tune button down for 30 seconds.. hard rebooted the 8.4 and all was good When you remote start you have to turn the truck off and restart to allow the radio to work, it’s a sharp learner no curve. Click to expand…
Why does my car stereo have no sound?
This can be due to your car stereo overheating or shorting out. This means that your radio has burned up and will no longer function. Because it no longer is obtaining any power, it cannot produce signals to the speakers so you have sound. If you’re still wondering why and how to fix a car stereo that has no sound, we’re moving onto the final step!
What should I do if my stereo is not working?
Therefore, if your stereo isn’t emitting sound, you should check to ensure that the wiring isn’t damaged from water exposure. Any water damage should be relatively easy to spot, as the wires will have a ‘fried’ appearance, and may show signs of rust.
What to do if there is no sound on internet radio?
You have two audio drivers, which may be conflicting. And as your Intel driver is also your video driver, I’d try disabling the Conexant HD driver. To do this go back to Device Manager, select the Conexant driver, right-click and select Disable (not uninstall). See if that makes any difference.
Why is my Realtek audio not working properly?
Update Realtek High-Definition Audio The common reason for sound problems on Windows is outdated, corrupt, or missing drivers. To fix this issue, downloading and installing the latest driver is recommended. This can be done either manually or automatically.
What to do if your speakers are not receiving power?
If the speakers are still not receiving power, reseat the power cable into the speakers. Verify the AC Adapter is securely connected to the mains power socket. If the Adapter is connected to an extension block, remove from the extension and connect directly to the mains power socket.
What to do if your audio is not working on Windows 10?
If that doesn’t work, try using the generic audio driver that comes with Windows. If you’re having audio issues after installing updates, try rolling back your audio driver. In the search box on the taskbar, type device manager, then select it from the results.
Why is there no sound on my Radio?
Dont have the option code because im at work right now. I can turn it on and off and change stations but there is no sound and no response from the steering wheel volume control or the radio knob. Anyone know the cure for this?